Jump to content

Recommended Posts

  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 3m 16d
  • Gender: Male
  • Location: Adelaide
Posted (edited)

newjetdynograph.jpg

got the snot tuned it went well....................massive thanks to the fluffa,bloosted and the one and only bruce heinrich :beerchug:

check this u ladies its got a mods list of this

herrod pipe kit

12psi actuator

hi flowed cat

60 lb dekas

new paper ford air filter

new fuel filter

cleaned t/b

new plugs gapped to .75

and a 044-swirl pot in the boot

flash 3

that's it my ladies went 386rwkw on bp 98 and did the 421 on 50-50 mix 98 e85 this is all at 17psi

the only thing that stopped me was the std cooler ,the std exhaust still has more in it this is what I call getting the most of std parts ...........and how does it go? well it goes 1-2-3-4 across the lights so bloody well me thinks and just to back it up its gunna be at heathcote park this sunday come down for a look boys :spoton:

Edited by Dagabond
  • Señor Member
  • Legacy Donating Member
  • Member For: 17y 10m 7d
  • Gender: Male
  • Location: Adelaide
Posted

ridiculous power from those mods man, bruce is a wizard

  • Legacy Donating Member
  • Member For: 15y 10m 25d
  • Gender: Male
Posted

awsome result for what you have done, and with std cooler and exhaust.

  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 3m 16d
  • Gender: Male
  • Location: Adelaide
Posted (edited)

I LARF LIKE HAHAH when ppl spend 2.5k on chrome pipes for an exhaust :roflmbo::roflmbo:

Edited by JETSNOT
  • Señor Member
  • Legacy Donating Member
  • Member For: 17y 10m 7d
  • Gender: Male
  • Location: Adelaide
Posted

so you engine bay would look pretty much stock? is the herrod piping kit stealth?

  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 3m 16d
  • Gender: Male
  • Location: Adelaide
Posted

nar man went hectik chrome hahaha but other than that yep stock as

  • A much better forum
  • Legacy Donating Member
  • Member For: 18y 1m 24d
  • Gender: Male
  • Location: Victoria
Posted

LOL @ High flowed cat!

  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 3m 16d
  • Gender: Male
  • Location: Adelaide
Posted

iam still lol-ing at cocksmacker comment I nearly wet my self :roflmbo::roflmbo:

  • A much better forum
  • Legacy Donating Member
  • Member For: 18y 1m 24d
  • Gender: Male
  • Location: Victoria
Posted

the only thing that stopped me was the std cooler ,the std exhaust still has more in it this is what I call getting the most of std parts ...........and how does it go? well it goes 1-2-3-4 across the lights so bloody well me thinks and just to back it up its gunna be at heathcote park this sunday come down for a look boys :spoton:

Standard turbo? Is it ported?

What about the auto? stock?

*Beep* said his next run will be at Heathcote, so you may be side to side...

Just make sure you do a proper burnout... I reckon *Beep* has bigger skids in his undies then he lays on the track! :stirthepot:

  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 3m 16d
  • Gender: Male
  • Location: Adelaide
Posted

100% stock turbo 100% stock zf literally that's the mods list but it does have a walbro intank for when I remove the spirl pot

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...