ASNU Member 261 Member For: 23y 7m 23d Location: Brooklyn Posted 04/11/10 04:07 AM Posted 04/11/10 04:07 AM Hi Twinpiston, who and where did the debung for you?cheersMy brother had his exhaust debunged at Brendale.We put some 440s in,Did the plugs when he came down to Sydney last week.Spiro from Autotech then did tune and he got 240awkw.The exhaust sounds terrible so are looking into a new systym now.He fitted a full 3.5 S/S systym to my car 2 months ago with a new tune.
Russell Member 36 Member For: 15y 10m 27d Gender: Male Location: Mango Hill QLD Posted 04/11/10 09:55 AM Posted 04/11/10 09:55 AM Where abouts in Brendale and roughly how much did they charge?
timboco Member 9 Member For: 16y 2m 4d Posted 04/11/10 10:12 AM Posted 04/11/10 10:12 AM A1 exhaust,southpine road brendale.it cost $70.00.they did it while I waited.
frank F6X Member 51 Member For: 17y 8m 20d Gender: Male Location: Cranbourne South Vic Posted 13/12/10 05:25 AM Posted 13/12/10 05:25 AM Hey guys Just to let you all know that my F6X is about to get an upgrade.Motor out new crank rods pistons frontmount and plenum4" dump 3"cat back It will be ready end of Jan 2011Will post photos and dyno
Dirty32 Legendary member!! Legacy Donating Member 1,739 Member For: 19y 7m 27d Gender: Male Location: Dianella, West Oz Posted 13/12/10 05:38 AM Posted 13/12/10 05:38 AM Sounds like some fairly serious work Frank...Did you have a failure on the stock engine, or are you chasing big power?What are you hoping for?
cobramad Member 824 Member For: 21y 2m Gender: Male Location: Perth Posted 13/12/10 11:01 AM Posted 13/12/10 11:01 AM Yep, serious build mate, I would perhaps be careful to ensure that you dont grenade your ZF... torque truncation is your friend... Cant wait for the results though.. Hope it goes really well mate!Mal K
frank F6X Member 51 Member For: 17y 8m 20d Gender: Male Location: Cranbourne South Vic Posted 14/12/10 05:36 AM Posted 14/12/10 05:36 AM Yeah had some serious issuses Popped a hole in number five piston I had the exhaust done bigger injectors and tuneDyno 250kw at all four then pop not good so now goin all out.Just waiting to find out if the transfer case will hold all that power.So is anyone out there knows anything about the tranfer cases.I have the word out to a ford engineer through a friend.The Guys at Casey Automotives that are doing all the work Think about 310kw - 320kw at all four Maybe.I will post step by step of the build.Ill try get some photos up of the car now.
Dillz Three pedals are better then two.. Legacy Donating Member 15,637 Member For: 19y 3m 23d Gender: Male Location: Melbourne Posted 14/12/10 05:55 AM Posted 14/12/10 05:55 AM Awesome, TT's have gone quite for a while..
Dyno Junkie Member 254 Member For: 19y 6m 1d Gender: Male Location: Ascot, Western Australia Posted 14/12/10 10:20 AM Posted 14/12/10 10:20 AM (edited) Yeah had some serious issuses Popped a hole in number five piston I had the exhaust done bigger injectors and tuneDyno 250kw at all four then pop not good so now goin all out.Just waiting to find out if the transfer case will hold all that power.So is anyone out there knows anything about the tranfer cases.I have the word out to a ford engineer through a friend.Very Surprised that you had an engine failure at that power level. Most our TTG has made is 322.8awkw.Has been running this same tune since the middle of last year.After cracking into the 11's at the track I had the auto serviced and was pleasanty surprised that the pan and the oil that came out where clean. Edited 14/12/10 10:25 AM by Dyno Junkie
frank F6X Member 51 Member For: 17y 8m 20d Gender: Male Location: Cranbourne South Vic Posted 15/12/10 01:39 AM Posted 15/12/10 01:39 AM Thanks Dyno JunkieSo you are pushing out 322kws at all four and holding up ok ?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now