Any Ideas For Group Buys? - Window shopping for blokes...

[Tree Monkey]

Gary at suburbanimports.com.au

[MUZ580]

So what's the story, will it bolt straight in and all you will need is the XR8 yoke?

[Tree Monkey]

i have no idea, just a little scared to write anything cos it gets modified to what they want. I think you will need most other parts as it is only the box and i think a ford v8 bell housing there is a list on the sight of all parts needed i will try to find out.

[Tree Monkey]

[quote name='Tree Monkey' post='610704' date='Dec 18 2007, 09:41 PM']i have no idea, just a little scared to write anything cos it gets modified to what they want. I think you will need most other parts as it is only the box and i think a ford v8 bell housing there is a list on the sight of all parts needed i will try to find out.[/quote]
found it i think

[url="http://www.fordxr6turbo.com/forum/index.php?showtopic=32569"]http://www.fordxr6turbo.com/forum/index.php?showtopic=32569[/url]

[Adrian6T]

Im interested to know what is needed also. Its a bit risky to buy it if everyones not sure if it can fit.

A little bit more info is required.

[Tree Monkey]

[quote name='Adrian6T' post='610709' date='Dec 18 2007, 09:52 PM']Im interested to know what is needed also. Its a bit risky to buy it if everyones not sure if it can fit.

A little bit more info is required.[/quote]

It is a ford T56 gear box new. I think it has a v8 bellhousing if you want specs call gary and ask him what you want to know. Remember it is only the box, i never stated it cane with all the other parts or someone to fit it.
I am going to use a viper box as i have been told that they are the strongest ones of the T56. I know it is out of a v10 dodge but the bellhousing un-bolts and for $1000usd why the hell not(only found out tonight). From other post on here the other parts needed should only cost around $1300, so for less than $3000 i have a allmost new t56 with a stage 3 clutch($300+from the states). Let your fingers do the walking and call

found this hope it helps
him!!!!http://www.ttcautomotive.com/English/products/tremec.asp Edited 18/12/07 12:35 PM by Tree Monkey

[stealthxr]

[quote name='Tree Monkey' post='610723' date='Dec 18 2007, 11:22 PM']It is a ford T56 gear box new. I think it has a v8 bellhousing if you want specs call gary and ask him what you want to know. Remember it is only the box, i never stated it cane with all the other parts or someone to fit it.
I am going to use a viper box as i have been told that they are the strongest ones of the T56. I know it is out of a v10 dodge but the bellhousing un-bolts and for $1000usd why the hell not(only found out tonight). From other post on here the other parts needed should only cost around $1300, so for less than $3000 i have a allmost new t56 with a stage 3 clutch($300+from the states). Let your fingers do the walking and call him!!!![/quote]
,

The input shafts on the V8 version of the T56 is different , as is the holden t56 i have already done what you are doing.....Dont know about the viper 1 thou, so be very careful, thats a lot of coin to lose if it dont fit,

Pm Mal Wood he will point you in the right direction... Im sure he will even do you a good deal if you ask nicely !

pete

[Tree Monkey]

[quote name='stealthxr' post='610739' date='Dec 18 2007, 10:40 PM'],

The input shafts on the V8 version of the T56 is different , as is the holden t56 i have already done what you are doing.....Dont know about the viper 1 thou, so be very careful, thats a lot of coin to lose if it dont fit,

Pm Mal Wood he will point you in the right direction... Im sure he will even do you a good deal if you ask nicely !

pete[/quote]
so just use a differant bearing, but i thought the v8 and t were the same ???
look at this

[url="http://www.ttcautomotive.com/English/products/tremec.asp"]http://www.ttcautomotive.com/English/products/tremec.asp[/url] Edited 18/12/07 12:46 PM by Tree Monkey

[MUZ580]

Why not ask Mal for a group buy price on new and reconditioned T56's. The kit will come with everything you need.

[2fardown]

Do yourself a favour by first doing all your research and then organise a group buy. Incase you didn't know already, there are quite a few different variations of the box....