Turbo standard brakes but not NA's

Yea it's a turbo. So if they fit I'll get them today. What pads do you recommend. Bendix are to dusty.

Has anyone used the rda rotors cause there less then half the price of the dba.

Does anyone know what part number I need to replace the rotors on the PBR MUSCLE KIT which are the same as the Blue Caliper FPV versions for the BA's?

DBA 42104S

I have a set of brand new bf/fg 328mm rears in dba4000 slotted (not t3)

41208sl and 42108sr
+ bendix pads to suit

will do a good price, pm me. Never put on car, sold car so these need to go

Aaron, thanks for that mate.

Missus got @rse ended by a white van and pushed her into 2 other cars so the brakes got put on hold while the car got fixed.

Anyone know if they an easy replacement in the drive with a jack and some axle stands?

Yeah brakes can be done in the driveway for sure. Just have a torque wrench to suit for reassembly and a bit of patience/penetrating spray for some of the bolts that may have been in place a while. Probably loctite in there somewhere too. Oh and brake cleaner spray to get the protectant oils off the rotor.

If you aren't confident though or have someone with you who knows what they are doing I would say get a pro to do it. Brakes are arguably the most important part!

Edited 26/11/13 11:31 AM26/11/13 11:31 AM by -SteveR-

Thanks for the quick reply Steve.

I did the discs on my old EL without a hitch so might give these a go.

Needs a service anyways and I think most palces charge about $60 for fit them.

Just need to find them cheap.

Yeah that's the hard part!