Flukey Seriously Flukey Member Legacy Donating Member 4,354 Member For: 22y 6m 4d Gender: Male Location: Melbourne Posted 13/12/05 12:24 PM Posted 13/12/05 12:24 PM Yep it's all to do with the computer, and unlike other people on this site who I wont mention, I did not leave it in P and I did not call for Road Side Assistance Suuurrreee Dave Seriously, I reckon my car "lost its tune" that night at Calder but all the experts say it cant happen. Mine has lost it as well.... it has only happened the one time, but it has happened.I wonder how many more this has happened to ?Yep mine to Dave, I find it happends in the mornings more often. If I start the car and put it into drive straight away it does what you have said and engine light goes on. But if I let it warm up a little say 2 mins its never happened. WTF Car is booked into HPF on Monday AGAIN!!!Rob...Mmmmm, that's a concern
DBOSS Faster than any BTA,XTC,Autotech, Nizpro and Tunehouse car Member 3,918 Member For: 23y 3m 3d Location: D SHIRE! Posted 13/12/05 12:26 PM Posted 13/12/05 12:26 PM My Xede doesn't lose it's maps.<{POST_SNAPBACK}>Or make pwr(on the road anyway)
Mr Turbo Next stage, to the Pub in 10 seconds Member 2,777 Member For: 22y 1m 12d Gender: Male Location: Berwick Victoria Posted 13/12/05 12:29 PM Posted 13/12/05 12:29 PM And just to add another thing, if im driving down a road and plant my foot down spining the tyres and back off, sometimes it goes into a limp mode This again does not happen that often. Its like having the same problem with utes putting big stall converters and going to limp mode due to traction control? Rob...
Flukey Seriously Flukey Member Legacy Donating Member 4,354 Member For: 22y 6m 4d Gender: Male Location: Melbourne Posted 13/12/05 12:33 PM Posted 13/12/05 12:33 PM ** Excuse me while I digress **Are you going to give it a run Friday Rob?
Dannopower Legacy Donating Member 421 Member For: 21y 3m 19d Gender: Male Location: Canberra ACT Posted 13/12/05 12:36 PM Posted 13/12/05 12:36 PM I have a mate with an edited GT that makes 250+rwkw on every dyno I know, but the other day it only made 230. I think its because the edit runs on Windows based software. We all know how reliable windows is. Just shut it down and re boot is the best answer any tech can give????
Mr Turbo Next stage, to the Pub in 10 seconds Member 2,777 Member For: 22y 1m 12d Gender: Male Location: Berwick Victoria Posted 13/12/05 12:44 PM Posted 13/12/05 12:44 PM ** Excuse me while I digress **Are you going to give it a run Friday Rob?Hey Luke,Getting my race map retune to 340rwkw's on next Monday so cant make it this Friday... Hope I dont end up doing a kamikazes run with the internals Rob...
Paradoxx Colossal Member Member 5,049 Member For: 22y 1m 1d Gender: Male Location: Perth, WA Posted 13/12/05 03:04 PM Posted 13/12/05 03:04 PM This is pretty weird, I was under the assumption that the memory in the PCM is over-written when you edit it. If it returned to the factory map... where did it get it from? I wonder if there is a memory in the PCM which stores a "fail-safe" tune for times when the engine is under too much stress (or a sensor fails...)Any ideas?
Mr Turbo Next stage, to the Pub in 10 seconds Member 2,777 Member For: 22y 1m 12d Gender: Male Location: Berwick Victoria Posted 13/12/05 11:57 PM Posted 13/12/05 11:57 PM I wonder if there is a memory in the PCM which stores a "fail-safe" tune for times when the engine is under too much stress (or a sensor fails...)Any ideas?that's a good question, anyone know of this?Rob...
Logsie Logsie Member 336 Member For: 21y 6m 14d Location: Queensland (Brisbane) Posted 14/12/05 12:51 AM Posted 14/12/05 12:51 AM Yer I had the same problem in tassie coming into a car park and then nothin it all shut off .Turned it off let it rest for a second re fired her up and started straight away took it for a service straight after that incident and havent had a problem since
GOLDIE My new toy Legacy Donating Member 5,344 Member For: 23y 5m 3d Gender: Male Location: stanthorpe wine capital of qld. Posted 14/12/05 01:08 AM Posted 14/12/05 01:08 AM I wonder if there is a memory in the PCM which stores a "fail-safe" tune for times when the engine is under too much stress (or a sensor fails...)Any ideas?<{POST_SNAPBACK}>that's a good question, anyone know of this?Rob...<{POST_SNAPBACK}>There is fail safe program in the pcm but as to where it is and how it works I am not sure but I do know it is peramently in the pcm.Ian
Recommended Posts