Search the Community
Showing results for tags 'offset'.
Found 5 results
-
G’day, Today I went over a stupid unsigned pipe in the middle of the road and buckled my clean deep dish 20’s that I run on My Ba XR6 Turbo, so when I got home I decided to test fit some 17x8 G6E rims that I had lying about thinking I could run them whilst my 20’s get repaired. when putting the 17”s on the rear of the car and checking for any issues, I noticed a bolt that’s to do with the rear suspension/ lower control arm (if they have them at the rear lol) that sits about 2mm away from the inside of the rim due to their offset. Is this an issue if I go over bumps or will the bolt/rim be one unit and not touch while going over bumps etc? I would upload the pics but don’t know how to turn a pic into a url lol 🤓
-
I'm going to get some new wheels for my ride, (stock height BF MK2 XR6 Sedan) I know the standard is 8 inches wide and 36 offset but im looking at 8.5 inches wide with either 42mm offset or 30mm Which is the best to go with? sorry if someone has asked the same question, I cant find any answers anywhere!!!
-
Hey guys, I'm new here, and I've been trying to find out a bunch of information on the fitment of wheels for my car. I've just picked up a 2006 BF F6 Typhoon, and shopping around for wheels. So 2 questions, 1) What is the offset for my standards? I think they're the "twist" wheels. 2) Also, from what I've gathered through searching, these sizes/offsets should fit (ie: clear the Brembos): 19x8.5 +30/35 19x9.5 +30 20x8.5 +35 20x10 +30/42 So, should this mean, if I go a set of TSW Bathurst in 19x9 +30 and 19x10.5 +27, would I need spacers? And if so, how thick? http://wheelwarehouse.com/collections/tsw-wheels-rims/products/tsw-bathurst-silver-w-mirror-cut-face I'm new to trying to understand offsets and stuff. These are the sizes and offsets that are available, so if you have a recommendation of sorts, I'm open: 19x8 +35 19x8.5 +15 19x9 +30 19x9.5 +39 19x10.5 +27 20x8.5 +40 20x9 +20 20x9 +30 20x10 +40 20x10.5 +25
-
Hi, I was wondering what is the max wheel and rim specs for an FG Falcon for both front and rear? I would like to know whats the max wheel diameters, widths, tyre widths, heights and offset of hub for rear and front? The legal specs and the illegal specs? And, the distance from the hub to the edge of the fender (used to calculate offset)? Anything would be appreciated.
-
Hi guys, Will the following fit my BA 2003 XR 6 Turbo: Versus Eurolace 18 x 9, Tyres 235/40/18, Offset 45 ? ta
