ULLCEE INFAMOUS Member 42 Member For: 7y 7m 6d Gender: Male Location: Gold coast Posted 18/01/25 09:56 AM Posted 18/01/25 09:56 AM Hi guys just after some help I've purchased a bf na skid car off a mate which caught fire and burnt the engine loom he has replaced the loom with a BA one and car won't start just seeing if BA and bf engine loom is the same or different as I have a no vatts ECU in it but it's won't start the car is a bf falcon with a btr 4 speed cheers
Puffwagon Legacy Donating Member 16,348 Member For: 11y 7m 27d Gender: Not Telling Posted 18/01/25 10:38 AM Posted 18/01/25 10:38 AM Might have left the starter wire off or forgot to attach the earth from the driver side engine mount to the chassis. 1
ULLCEE INFAMOUS Member 42 Member For: 7y 7m 6d Gender: Male Location: Gold coast Posted 26/01/25 04:17 PM Author Posted 26/01/25 04:17 PM Thankyou got it sorted🙏
k31th less WHY; more WOT Site Developer 30,107 Member For: 18y 5m 15d Gender: Male Location: Melbourne Posted 26/01/25 10:18 PM Posted 26/01/25 10:18 PM so it was the starter wire? or earth? that puff suggested?
ULLCEE INFAMOUS Member 42 Member For: 7y 7m 6d Gender: Male Location: Gold coast Posted 28/01/25 09:10 AM Author Posted 28/01/25 09:10 AM No previous owner spliced into the crank angle sensor wiring and had the wires back to front and also some of the injectors had no o-rings on them also fuel lines were wrong way around🤦🤣 1
xr6tForMe Legacy Donating Member 317 Member For: 13y 2m 27d Gender: Male Posted 30/01/25 05:38 AM Posted 30/01/25 05:38 AM Sounds like it should work a whole lot better now!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now