Skip to content
View in the app

A better way to browse. Learn more.

Ford XR6 Turbo.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Transmission fault code

Featured Replies

#1

Hi everyone, 

 

I'm having some trouble diagnosing some trouble codes which have been making the car go into limp mode. The car has been tuned and has about 310rwk. I believe the code that is making the car go into limp mode is the trans friction element code in the screenshot. I have recently done a trans fluid flush which has improved the situation but I'm using gw syn trans. 

Screenshot_20210421-175010_Torque.jpg

  • Replies 51
  • Views 8k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • biddie_fiddler
    biddie_fiddler

    If it never happened before the tune and now occurs after the tune, then logically it would be the tune causing this. It could just be a complete coincidence but either way I'd go back to the sho

  • Yes Andrew did all this, and BTW thanks for the write up in regard to external trans cooler install, it was very helpful!

  • Puffwagon
    Puffwagon

    Yeah nah that's too hot. Start the car from cold, put it in drive and fill the bastard asap.

Posted Images

#2

Did it have a ZF tune as well? Check the fluid level when first started for the day, when its cold. Start and fill to it comes out (level ground or 2 jacks etc). Then go for a drive and manually go through all gears up and down changes and reverse. Otherwise back to the tuner.

#3
  • Author

Fluid level is fine, been to the tuner and apparently haven't seen this code before, sorry I should have explained this. The zf has been tuned as I have no torque tags and it shifts differently. Anybody have issues with gw fluid? 

Edited by josh883

#4

Its not the fluid a lot of us here use it with no problems. Was it definitely GW SYN-TS? Otherwise its the tuners issue if it has happened after a recentish tune. 

#5
  • Author

Yeah possibly. Just thought others may have had the same problem with that error code. 

#6

When does it occur? Only when giving it 'the beans'?

Or does just cruising around cause the error to pop up?

#7

Who did da tuning? Is it someone who works on these cars often? 

#8
  • Author
3 hours ago, cat007 said:

When does it occur? Only when giving it 'the beans'?

Or does just cruising around cause the error to pop up?

It occurs when I give it sum. I attended coffee laps at Queensland Raceway and when I first went out I opened her up on the straight, gearbox was around 70 degrees bang straight into limp mode (no boost but drives normal). Come off the track Cleared the error started up and got back on. It occurred one other time during the 90min session so I was happy but want to get this sorted. I'm running true track diff and 265 tyres, I have been disabling the traction control when giving it a bit. 

#9

If it never happened before the tune and now occurs after the tune, then logically it would be the tune causing this.

It could just be a complete coincidence but either way I'd go back to the shop that tuned it and who did the service on the trans.

 

To me the next logical step is to reset the tune on the trans (go back to factory settings) and see if the code reappears. This way you can see if it was the tune doing this or if its something else. 

 

How many k's are on the box? Have you ever had other issues with it?

#10
  • Author

No issues with the box before tuning and it has just kicked over 200 000kms, however after the tune I fitted an external pwr trans cooler behind the fog light and did a fluid flush with gulf and Western. I have not changed the filter for 60000kms but will do this weekend. I'm thinking it's more fluid or pressure related as I haven't noticed a difference in the transmissions performance. So other issues could be the pump or preasure leak possibly in the sleave.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.