425kw Fg F6 Manual @ CMS

[JoshF6]

Hey guys,

 

Finally broke into the 400's on 98 octane. All work has been performed by Joe at CMS Prestons since late 2016 and previous tune was 385rwkw on 18psi

 

Since then I dropped the car off a couple weeks ago and supplied with GTW3884r turbo upgrade and Stage 4 Atomic cams & head studs.

 

Joe worked his magic and car turned out 425rwkw and 1054nm all on the same 18psi. The difference is mind blowing how much harder it comes on boost and just keeps pulling up high! Very happy with it.

 

Big thanks again to @JETURBO for supplying me with some goodies once more.

 

pics should be attached hopefully..

 

 

 

 

Edited 24/02/18 06:02 AM by JoshF6

[k31th]

beautiful car and very impressive power on 98

 

need a vid of dyno or track as soon as you can

[JoshF6]

Thanks mate, appreciate that!

 

I will get a video of it idling soon as the cam is actually very lumpy considering it's not a 4+ version..

 

Heading to WSID next chance I get in March and I'll l get some footage.

Edited 24/02/18 06:15 AM by JoshF6

[Puffwagon]

Hey man that's a clean looking ride and a good result with 98.

 

What are the specs on the turbo?

[JETURBO]

Hey Josh , congratulations buddy and that’s a very good result on 98 for sure 

 

glad I could help you out mate  

[JoshF6]

2 hours ago, Puffwagon said:

What are the specs on the turbo?

Hey mate , the turbo is just an out of the packet gtw3884r from Pac Performance with a turbo smart actuator.

[JoshF6]

Sorry about the above photobucket issue.. Here are the pics through Imgur

 

 

 

 

 

 

[JoshF6]

Tried to upload idle, didn't work.

Edited 24/02/18 10:48 PM by JoshF6
No audio

[k31th]

upload it to youtube then copy the link straight into the edit box here... should do the job

[JoshF6]

YouTube vid link below of car at idle with Atomic stage 4 cams..