Fg mk11 Plazmaman stg 3 fitment

[Jamie_d]

So we have a stage 3 plaz kit and struggling to get the front bumper on. I understand from the instructions that the fg mk11 is the hardest to get to fit around the fog lights but they say it does fit regardless.

To anyone whose fitted these to the mk11 what are we missing? Just don't seem to be able the get the pipes to tuck in the extra we need.

Cheers.

[OZYWALKER]

You'll probably have to trim a fair bit of the plastic renficement behind the bumper.
There's a fair bit between the open part and the fog lights. Had to trim a fair bit to fit my Tig kit with an FG front but it runs very similarly to the plaz kit.

[Jamie_d]

Yeh all that is trimmed we just can't get the pipes to tuck in closer. Considering cutting the beads off the end tanks so they'll push into the reinforced part of the hose haha.

[Boosturd]

You'll probably have to trim a fair bit of the plastic renficement behind the bumper.
There's a fair bit between the open part and the fog lights. Had to trim a fair bit to fit my Tig kit with an FG front but it runs very similarly to the plaz kit.

You wouldnt happen to have some instructions for the Tig kit laying around would you?

[BAXRTUTE]

@JETURBO mite have some.

[JETURBO]

Love it when blokes say, “Nar I’ll fit it myself” haha sure go for it 

 

good times 

[OZYWALKER]

Instructions lol. Didn't get any with it or the process west stage 3 kit I had before that.

[JETURBO]

These kits aren’t for the average joe to install and even Plazmaman who do have instructions with their kits clearly print “to be installed by professional workshops” 

 

chits not easy bro’s ! 

[Jamie_d]

Haha they really are a pain.
So we ended up getting the piping to push onto the cooler further we were obviously being little girls when we were first trying. Sits very nice now and he is happy with it.