Sweet EB Member 27 Member For: 20y 10m 22d Gender: Male Posted 03/07/16 05:37 AM Posted 03/07/16 05:37 AM Hi all, I have a BA XR6T manual. It's has a moderate power increase which has been that way for years ~250 RWKW.. I stepped off the clutch today and give it a bit and I heard a definite clunk and then a lot off woop woop noises and what sounded like loud bearing noise under coast conditions.. The bearing noise sound just like a very bad wheel bearing noise. Noise is a lot quieter when under a bit of load but gets very loud when you back off. Additional to that, when you take off from standstill, it kind of jerks the car like your pumping the brake peddle a bit while taking off. The when rolling in reverse into my driveway, it was make some pretty ugly clunking noises.. Haven't had a chance to have a look but what is everyone's thought of what it could be.. Sounds pretty bad.. Car gets driven about once a month with just over 100k on the clock. 1
k31th less WHY; more WOT Site Developer 30,100 Member For: 18y 5m 9d Gender: Male Location: Melbourne Posted 03/07/16 06:04 AM Posted 03/07/16 06:04 AM tailshaft centre bearing, is my guess.
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 11m 27d Gender: Male Location: Perth Posted 03/07/16 06:32 AM Posted 03/07/16 06:32 AM Diff. Sounds like the pinion preload spacer has collapsed and the pinnion is dancing around.
bamk2f6tornado Legacy Donating Member 777 Member For: 12y 9m 16d Gender: Male Location: Rockhampton Qld Posted 03/07/16 07:55 AM Posted 03/07/16 07:55 AM I had the same symptoms when my whole diff centre cracked. Quiet under load and stupid loud under deceleration. I ended up replacing the centre with a trutrack 1
stubbietubbie Filthy weeb Member 1,870 Member For: 13y 7m 3d Gender: Male Posted 03/07/16 09:48 AM Posted 03/07/16 09:48 AM GET OFF YOUR KNEES.
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 11m 27d Gender: Male Location: Perth Posted 03/07/16 09:49 AM Posted 03/07/16 09:49 AM WAKE UP SHEEPLE 1
MattyP MattyP Legacy Donating Member 6,317 Member For: 14y 4m 15d Gender: Male Location: Central Coast Posted 03/07/16 10:01 AM Posted 03/07/16 10:01 AM Steel fuel can't melt jet beams
Sweet EB Member 27 Member For: 20y 10m 22d Gender: Male Posted 05/07/16 01:38 AM Author Posted 05/07/16 01:38 AM On Sunday, July 03, 2016 at 5:55 PM, bamk2f6tornado said: I had the same symptoms when my whole diff centre cracked. Quiet under load and stupid loud under deceleration. I ended up replacing the centre with a trutrack No what I want to hear..! Will get a chance to have a look this arvo.. It's been killing me not having a chance to work out what's wrong.. Hoping it is just a half shaft..
bamk2f6tornado Legacy Donating Member 777 Member For: 12y 9m 16d Gender: Male Location: Rockhampton Qld Posted 05/07/16 01:42 AM Posted 05/07/16 01:42 AM If you have a Ute it's easy to check. Just whip off the diff centre cover. If you have a sedan then that's a big job haha. Check the easy stuff like centre bearing first. If centre bearing is fine just rock your tailshaft back n forth. When my centre cracked I have about 10mm of play
Sweet EB Member 27 Member For: 20y 10m 22d Gender: Male Posted 05/07/16 01:57 AM Author Posted 05/07/16 01:57 AM Yeah unfortunately it's a sedan.. Mine has always had a bit of play.. What were you doing or happened when your diff let go..? I have done a lot worse and nothing has happened before.. I don't understand why something broke this time... Wasn't a full clutch dumb.. Was normally just enough to break traction.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now