X Force Exhaust 3.5" Or Duel 2.5"

[Bizkets is Drunk?]

Saturday. cooler tomorrow.

[arronm]

anyone have a pic of the 4" turbo back with the twin tip on a fg. received mine today. not sure if I leave it normal or go the twin tip.

[Bizkets is Drunk?]

brother thinks he can have it on in half a hour. I laughed at him. got a pit to work in to shouldn't be to bad. welder ready to.

Edited 08/10/14 11:04 AM by Bizkets is fat?

[arronm]

What brand exhaust did you get. Any pics.

[Bizkets is Drunk?]

x force 4" turbo back.

[camo86T]

Those measurements arnt correct. single 3.5 flows more than twin 2.5

Based on 1.2mm wall tube, 5876mm² for single 3.5" and 5864mm² for twin 2.5"...close or close?

[aussie1926]

I got the 4 inch on mine, biggest problem I have had was the clamp on the rear section over the cradle on the slip joint. Broke the bolt in it and couldn't get it tight enough so the rear muff moved and hit on the cradle. Got a clamp from work and all sweet now no more annoying knocking. I also kept the standard tip, looks mean as.

[Seaton]

+1 for 4" with twin tips.

Not an xforce though. Very tight fit.

[Bizkets is Drunk?]

I got the 4 inch on mine, biggest problem I have had was the clamp on the rear section over the cradle on the slip joint. Broke the bolt in it and couldn't get it tight enough so the rear muff moved and hit on the cradle. Got a clamp from work and all sweet now no more annoying knocking. I also kept the standard tip, looks mean as.

pic

[JETURBO]

We weld this joint as that clamp is junk as u found out