rednose RNS10S Donating Members 2,229 Member For: 18y 10m 18d Gender: Male Posted 17/01/14 11:37 PM Share Posted 17/01/14 11:37 PM (edited) As you may know I have been wanting to fit a 305 rear tyre on my car for a while.First step was purchasing the wheels............Found a set of 19" Axis Hiros in 8.5 front and 10.5 rear with minor gutter rash on the rear 2 wheels.Next was trying to get a loan tyre for a test fit, called 5 shops and they all said they didn't have any,so contacted vevapower who was glad to help and within no time had a loan tyre for me to pickup.305/30/19 mounted to the 10.5 rearNext shot is the current 275 Hankook on my 9.5 rearThis is the 305 on the 10.5 but in order for it not to rub on anything we needed to use 6mm of spacingSo once we make some small mods to the car we can remove the spacing and it should sit a further 6mm inwards.After that the wheels will be repaired and painted charcoal to match the bottom side skirts. Edited 17/01/14 11:44 PM by rednose 7 Link to comment https://www.fordxr6turbo.com/forum/topic/87312-project-305/ Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 10m 18d Gender: Male Posted 17/01/14 11:42 PM Author Share Posted 17/01/14 11:42 PM (edited) Will try and get some pics of what needs to be modded. Edited 17/01/14 11:43 PM by rednose Link to comment https://www.fordxr6turbo.com/forum/topic/87312-project-305/#findComment-1450792 Share on other sites More sharing options...
Lennox Member 2,586 Member For: 12y 4m 8d Gender: Male Location: Perth Posted 18/01/14 12:33 AM Share Posted 18/01/14 12:33 AM Nice fat tyres love it Link to comment https://www.fordxr6turbo.com/forum/topic/87312-project-305/#findComment-1450796 Share on other sites More sharing options...
CCCC miso xr6 Donating Members 317 Member For: 16y 6m 25d Posted 18/01/14 04:12 AM Share Posted 18/01/14 04:12 AM that's great george, will look tuff as. Link to comment https://www.fordxr6turbo.com/forum/topic/87312-project-305/#findComment-1450816 Share on other sites More sharing options...
jimmixr Donating Members 686 Member For: 14y 10m 15d Posted 18/01/14 04:58 AM Share Posted 18/01/14 04:58 AM Theres George measuring 10 inches with his hand again!!!Tape measure doesn't lie George!!! 1 Link to comment https://www.fordxr6turbo.com/forum/topic/87312-project-305/#findComment-1450823 Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 8m 15d Posted 18/01/14 05:17 AM Share Posted 18/01/14 05:17 AM What offset? guard work? camber? Link to comment https://www.fordxr6turbo.com/forum/topic/87312-project-305/#findComment-1450827 Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 10m 18d Gender: Male Posted 18/01/14 05:37 AM Author Share Posted 18/01/14 05:37 AM +42 offset, guards have been rolled, no camber adjustment, what ever it was as per last wheel alignment 1 Link to comment https://www.fordxr6turbo.com/forum/topic/87312-project-305/#findComment-1450830 Share on other sites More sharing options...
f6mark Member 2,909 Member For: 14y 4m 20d Gender: Male Posted 18/01/14 06:21 AM Share Posted 18/01/14 06:21 AM looks Great George. Link to comment https://www.fordxr6turbo.com/forum/topic/87312-project-305/#findComment-1450836 Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 10m 18d Gender: Male Posted 04/02/14 05:04 AM Author Share Posted 04/02/14 05:04 AM 12mm plates have been made, may be able to test fit early next week.If all is well then it's tyre purchase time !!!Just need to decide between Invos or RS3's Link to comment https://www.fordxr6turbo.com/forum/topic/87312-project-305/#findComment-1453234 Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,332 Member For: 19y 9m 11d Gender: Male Location: Perth Posted 04/02/14 05:25 AM Share Posted 04/02/14 05:25 AM I totally missed this thread, I ran 295/35/19 Federal 595rsr's for a while. They measured 309mm shoulder to shoulder on a 9.5Axis hiro.I made up spacers similar to yours for the Control Blades (if I seen this thread sooner I would have given them to you! I binned them a couple of weeks ago)I had to roll the shiiit out of the guards and trim the body work where the bumper meets the bumper inside the guard.tractions was not and issue! 1 Link to comment https://www.fordxr6turbo.com/forum/topic/87312-project-305/#findComment-1453240 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now