Zf Gearbox Fittings

[sexalious]

G'day guys, I was wondering if anyone knew where I could find the fittings that push into the side of the gearbox, I want to replace the plastic ones with metal/brass, they would need to be hose tail 3/8 dia. in either a 90 or a 67.5 degree's configuration.

Any help would be greatly appreciated thanks.

[ratter]

got 2 sitting on me desk at work, straight dash 8 fittings, but there about $50 each

3/8 is too small and will cause a restriction

Edited 06/06/13 11:01 PM by ratter

[quick1300]

Hey there

I work for motospecs we sell a external cooler kit with fittings

Call 88677100

Cheers

[JETURBO]

post piks and details of this cooler kit motorspecs please

[CHLAXN]

You after a pair of these? They are -8 got them from furious performance.

[sexalious]

Thanks guys, I think 3/8 hose is the standard size isn't it ??.

Thanks quick 1300 I already have a b&m cooler that I got some time back for another car, I just want the fittings that's all, F$%k they are hard to get hold of.

Those dash 8 fittings if you look at the hole in the end that goes into the box, it looks ( and it is hard to see ) like its only about a 1/4 inch hole, is there any chance of measuring that at all ??.

I was trying to just get hose tail fittings because its so much easier, but looks like I will have to go dash fittings, if I have to do this then I might as well go braided lines.

Anyway guys thank you very much for your response's any other info greatly appreciated.

[CHLAXN]

I'm at work out the mines ATM mate not home till Sunday night. If I remember I will measure it when I get home. Cheers

[RHR]

You after a pair of these? They are -8 got them from furious performance.

Just to clarify. These fittings to directly into the side of the box and the the rubber hoses go to the cooler yeah??

[sexalious]

Thanks chlaxn, and yes rhr these are the one's that go into the side of the box, found out today that I can get a reducer from the -8 or -10 to a -6 and then get a fitting for the -6 with a 3/8 hose tail to fit my hose, cant believe that it is this hard to just get this cooler on.

[ratter]

that size cooler is too restrictive, you need a bigger flowing cooler