Will This Work

[ian69]

v+it wont fit beteen the cooler and the condenser it will be on a angle and I was going to get some tags welded on top of the inter cooler to hold the bottom and make a bracket four the top

[JETURBO]

Yes it will work but inlet and outlet need to be either 90 degrees to the way u have it or facing down

Done exactly that on my ba and fg

[ian69]

so I need to face the out let;s down facing the intercooler that right. it wont fit with the outlets facing the head light if that makes sence

Edited 04/11/12 10:35 AM by RHR
Quote removed. USE ADD REPLY

[Wenier]

Anything can work, as long as it gets enough flow through to cool then its fine.

[ian69]

no worries thanks

[jas98]

wait....so the inlet and outlet "should" face down? whys that? mine are faceing up?

[JETURBO]

Dude have a think the pump from the trans has to pump fluid up hill then it drops onto the cooler then has to force the oil through the cooler then all the way up again to go down to the trans again

Spin the cooler so in and out lets face the headlight or down

Yes it will fit theres heaps of room in your pics