Exhaust Now Popping On Decel Badly.

[MY ROD GOT OUT]

Sikaflex it is

[Ralph Wiggum]

smiths racing services have cam angle solenoid and coil plugs

[bionicxr6t05]

Just make sure it gets no where near the pins

[Kroozin]

So it's back again... anyone know how to fix it?

It cost me an arm n a leg last time it happened... WOFTAM

The cat one has always been there but the camshaft fault is the one that concerns me.

I noticed the car hesitates under just less than half throttle around the time when boost should be gentlyish coming in. If I give its stab the car appears to go like normal. Though it just seems laggier than normal.

[ratter]

check your valve timing

[Paulie2256]

Change tuner

[SuckSqueezeBangBlow]

to me that says: P1385 camshaft position actuator ok t (b2)

It's the "everything is ok with your camshafts" code.

I think it looks more like: P1385 camshaft position actuator ck t (b2). with "ck t" meaning check timing.

[ratter]

his current codes are po420 which is cat effiecency which should have been rectified in the tune the other is p1383 which indicates a retarded cam

CKT stands for circuit which normally appears with riring or connection issues or internal failure of a sensor/solenoid etc

[Kroozin]

check your valve timing

What the best way to do this? Do you mean pull the cover off and line up both gears with the markers and see if the harmonic balancer and both gears line up with there respective marks?

Change tuner

Yeh I'd be a fool to go back... Nuf said there

his current codes are po420 which is cat effiecency which should have been rectified in the tune the other is p1383 which indicates a retarded cam

CKT stands for circuit which normally appears with riring or connection issues or internal failure of a sensor/solenoid etc

With the sensor/wiring are they both the same thing being the variable gear or Wat Eva it's called?

I get this is really anybody's guess but.. What would potentially be the root cause of the gears failing again? If of course that's actually what's wrong again.

[ratter]

you don't have a code relating to a CKT fault this time, your last one did, that description was because another poster gave incorrect description.

did the gears fail the last time? if so what was replaced?