Fpt & 6Boost Go 735 Plus Kw & Still Climbing

[qik1]

Thanks Geoff, its been nearly six mths again since ive driven it so will be good to get back behind the wheel, it'll be some type of monster this time.

Im guessing around 6wks for completion as we have alot to do to it yet but we have everything bar the cams so it is just time now. We decided to run sensors in every runner on the exh manifold so 6boost have modified it to suite, just another little something to make sure all is well when we do decide to turn it right up.

As for atomic I think they have some good parts, we're still using the rods, girdle, oil pump, balancer and anti pump lifters but as for the complete engines I wont comment any further

[2MUCHKW]

Nice work john be nice to see it on the road and for you to enjoy it been a long road that's for sure. Nothing but trouble with atomic built motors I would not recommend them after the drama I had with mine... Make some good gear but so do other company's!

Care to elaborate on you personal experience with your Atomic Engine?

Quality feedback from personal experiences assists forums member make informed decisions when rebuilt engine purchases have to be made.

Not sure why Qik1 wont share his personal experience and what he found upon disassembly with his Atomic engine?

Secret squirrel stuff?

[discostig]

Court case is more the reason I'd say. Pretty standard rule.

Less talk of old issues more talk of xmas monster car

[sexual harrassment panda]

Please don't elaborate . . . . I now own that engine :-(

sent from phone via idags4lyf free app

[freeze_dk]

Too much reading, not enough pictures

[qik1]

Court case is more the reason I'd say. Pretty standard rule.

Less talk of old issues more talk of xmas monster car

^^^ This. Im never secret squirrel about anything but as ive already stated because of potential action I can't discuss anything at this point.

On a better note the engine is one hundred percent complete and assembled top to bottom. They'll start in abit over a wk with wiring and then putting the eng in where it belongs. There's new airbrushing and covers for it so a few cosmetic changes and a few interior changes with the new digital dash and 10in screen where the icc once lived.

[discostig]

Do you plan for the LCD screen to flash up DANGER TO MANIFOLD?

[qik1]

and welds on floor pan lol

[discostig]

That's what we like to hear!

[Bonjaz]

Be sure not to bust the welds on the intake!