Cooler For 300Rwkw

[scottay]

So im only chasing 300rwkw maybe a tad more. What is a decent cooler setup that is not too expensive.

Also im wanting to maintain the std airbox aswell

Ta

[Worm]

Stock typhoon will get you there... But may start to cause heatsoak when running on full throttle for a while!!!

[scottay]

Yeah was thinking that, so whats the next best thing up from that.

[Dillz]

Check out Rapid systems

Here

[discostig]

I bought a nizpro cooler second hand for cheap which will easily see early 300's (it was running 400s on the ex owners car). I bought it due to the stock/monza coolers needing more boost for the power and their propensity to heatsoak as metioned.

Rapid have nicely priced parts that perform as well. I hear plazmaman/nizpro/process west are better, but how much I cannot say. Not much between them for 300s I reckon!

Edited 20/07/10 08:22 AM by -SteveR-

[82CNT]

I have the F6 and its not up to it but I couldnt afford some of the better products either. if I wasnt selling my car I would have gone down the HDI path. 550-600 for piping and decent sized cooler. Google them. There are a fair few people running mid 300's with HDI

[Worm]

Mine with F6 wasn't showing very much heatsoak at all on dyno...

With 11psi was getting 290 but running lean on fuel (injectors) but would have easily have made 300 with fpv cooler...others have made 300 on stock cooler...

[discostig]

I forgot about HDI, think they are sponsors now too. Good results being had with them it seems! Was looking at them early on but they were untested back then so I decided against it.

[Worm]

He wanted to keep stock piping didn't he???

[2door350]

Been tossing up cooler for similar job myself...ordered the rapid v2 kit today cost $1.5k, if you want stock piping (and a bit cheaper) have a look at the plazmaman 800hp cooler...costs about $1k