Fg Which Cooler

[310_FSX]

Bring on the results... Its IC purchase time for me too and I am yet to decide which way I am going

Cheers,

Matt

[Process West]

As I said in a previous post I wont participate in this test because it would be biased. SIR20B worked for PWR for about 10 years that I know of.

An independent test would be great. It would give the forums members a great insight as to how badly extruded tube and fin intercoolers perform compared to the bar and plate I sell.

If an extruded intercooler core worked better then I would use it. Fact is, it does not.

Kev

[(BOOSTN)]

a test off would be great, we want to see results not just claims, pwr do that with theres...why dont u take a cooler up there with u, and do the tests at the same time..wouldnt it be worth your while..

[EZY10S]

Mmmmmmmm interesting thread..

Edited 28/07/10 12:15 PM by EZY10S

[Sir20B]

As I said in a previous post I wont participate in this test because it would be biased. SIR20B worked for PWR for about 10 years that I know of.

An independent test would be great. It would give the forums members a great insight as to how badly extruded tube and fin intercoolers perform compared to the bar and plate I sell.

If an extruded intercooler core worked better then I would use it. Fact is, it does not.

Kev

Oh Boy... (or should that be boo hooo)

Now you re making me laugh..

That's a big call for someone who wont commit to the CoolOFF

Also I can’t actually see where you said you wouldn't commit , until the post above..

Anyway, my count, the 'ol' Extruded T&F has it over the B/P core 5 out of 8 tests in my above test, may be more..

For some insight (for now) name the country of origin of your "U beaut" B&P core....?? Be honest..

Cheers

[Process West]

In post number 17 I said

"bring on an independant test"

My cores come from China...that's no secret.

So you have already done the back to back tests please post the results up.

[tab]

Keep it civil ladies or I'll have to get all nasty on your arses

[Rhino1980]

I've heard people bagging cheaper (shouldn't say cheap cause it makes them sound crap) or, "more economically viable" coolers out just cos they don't cost the earth. RDP has one of the fastest FG's and he runs a HDI. Riki83 has four hundred and something at the bags and runs a HDI. There are plenty of heavy hitters with Rapid's gear and, no suprise, plenty of good results with PW. Why can't you all stop bagging the sh*t out of each other and jacking each other's threads and posts? At the end of the day, not everyone can afford the dearest stuff and they shouldn't be made to feel like they have made a wrong purchase because of that.

[Bo0st3D XR6]

Quite true rhino as not all or shall I say majority will be pushing 500rwkw+. Any decent cooler out there will support 350-400rwkw and that's way enough for street use which most people are here for.

[(BOOSTN)]

I cant see where anyone mentioned the word cheap in the first 2 pages of this thread,

nor 500+rwkw for that matter...

The only other brand that I can see mentioned until the posts above was plazmaman..

and they were given praise...

Chin up boys