Hey guys, I just got some dark argent 20s on my ute, now I want to lower it.

If you could post some pics of yours, and what suspension is in it that would be great.

I'm thinking King springs in the front and just getting the leafs reset.

I did a quick chop of the height I'm after, maybe a little lower at the front.

Cheers, Keelan

Hey, I'm also going to be lowering my BF with king springs and reseting the leafs. Overall I will get approx 25mm drop front and rear. Here is a general idea of what it will be. I noticed that yours sits level whereas the ass of mine is always higher.

Edited March 2, 201016 yr by Wenier

Tein coilovers + reset leafs

I know mines not ba/bf but here is a pic of mine. pedders springs front and rear.

Man those are low. How much of a drop from std was that?

20' hp designs

uurrrhhmmm... I still have the coils and leafs to suit FG Ute. Centre of hub to guard measurement is 335 mm...

If I was you I'd do it properly and get a set of replacement leafs.

I've got a set of Kings and from memory they have one or two extra leaves to stop the bouncy bounce

The guy that mods mine actually adds a leaf, thin one, and its all heated up and reset unlike some places that just bend an end so it as good as a replacement set.

Man those are low. How much of a drop from std was that?

I dont know if your reply was aimed at me or not but lowered 35mm in the front and bout 60mm in the back.

I agree with what was said above. replacement springs are a good idea incase you ever want to put it back to standard.