Jump to content

Recommended Posts

  • Donkey Dick
  • Member
  • Member For: 16y 6m
  • Gender: Male
Posted

Dean, 10.3/136 - damn. What are you going to do with the car, track work? Or just another daily sh*tter? :)

Weekend warrior.

Reading fs thread on PF suggests that might be on old power level? Either way your right. It is bullsh*t fast :)

Would assume so, but unsure. Also would have been with the dog box that was later exploded at WSID

  • Legacy Donating Member
  • Member For: 19y 5m 6d
  • Gender: Male
  • Location: Caracciola Karussell
Posted

That's an expensive mistake... But I guess when your dealing with cars like that it's bound to happen. When it arrive in Perth?

So when's the Hollinger going in :P

  • Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds
  • Legacy Donating Member
  • Member For: 15y 10m 29d
  • Gender: Male
  • Location: Work
Posted

North.

+1

hey Chippa, did u say something a while ago about a permit for having oversized rims? just thought id better sort 1 out b4 I get defected again (im not trying to, but these things happen when ppl in blue get a bit jelous)

Gonz, so u pushing your upgrades forward? im going to see simon next break to check out my options. sold my Subi :crybaby:, so have a bit of extra money.

Tom, u read much of that book?

Every1 - got a 4"dump and cat for sale? and maybe a merge pipe? ohh, and a nizpro cooler/pipes?

well that's my upddate :)

  • Slippery when dry
  • Legacy Donating Member
  • Member For: 19y 2m 7d
  • Gender: Male
  • Location: Foot Hills W.A
Posted (edited)

Krazy I think that it was mentioned by John (Superpursuit83 I think..) apparently you can obtain a permit cheap maybe PM him for more info....on the subject of wheels etc 18x8 +40 with a 245 on the front(18x9.5 +40 rears with 265),probs or all good??? only an extra 3.5mm to inner strut....

Edited by chippa
  • Dropping a turd
  • Legacy Donating Member
  • Member For: 18y 10m 23d
  • Gender: Male
  • Location: Perth
Posted

Just ordered a set of Axis hiro for Todd from Tempe 8.5 front +36 and 9.5 +40 rear . I wanted +45 so we wouldn't have needed to roll the guards but they only had +40 so got them - 245/35/19 and 275/30/19 Kumho KU31. May be here by friday. But the best thing is he gave me his genuine staggered dark argents . NICE

  • Slippery when dry
  • Legacy Donating Member
  • Member For: 19y 2m 7d
  • Gender: Male
  • Location: Foot Hills W.A
Posted (edited)

Hey Arron you reckon a +40 on the fronts would work with the 8" on the fronts???? I'm only running std calipers on the front and dont really have any intentions of ugrading them(he says that now haha) but will most likely do the passivated RDA and reds...

I thought I read in one of your posts that a +41 would work or is the 275 the prob???

Edited by chippa
  • Manual mode ________________________ All day, erryday
  • Legacy Donating Member
  • Member For: 18y 9m 26d
  • Gender: Male
  • Location: Probably above atmospheric pressure
Posted (edited)

Arron: Genuine staggered? Did he get the rears widened?

Edited by -SteveR-
  • Dropping a turd
  • Legacy Donating Member
  • Member For: 18y 10m 23d
  • Gender: Male
  • Location: Perth
Posted

No problem on the front 8.0 +40 will give 2mm more clearance than an 8.5 +36. On the rear 9.5 +36 to +45 with a BA BF or max +42 with 10 inch

  • Dropping a turd
  • Legacy Donating Member
  • Member For: 18y 10m 23d
  • Gender: Male
  • Location: Perth
Posted

Arron: Genuine staggered? Did he get the rears widened?

No that's how they come +36 on the front and +28.5 on the rear. All 8.0 x 19. Not one scratch. Iam selling my 20 inch dark argents.

  • Manual mode ________________________ All day, erryday
  • Legacy Donating Member
  • Member For: 18y 9m 26d
  • Gender: Male
  • Location: Probably above atmospheric pressure
Posted

Oh I didn't realise it referred to offsets, thought it always had to be a wider rim. Makes sense of course. If I need rim advice I'll just ask Tocchi, he's the fitment guru locally from what I gather hahaha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...