Jump to content

Recommended Posts

  • Here since the start...
  • Lifetime Members
  • Member For: 22y 21d
  • Gender: Male
  • Location: Victoria

Hi GTP-330,

Have you got any photos of how this system of yours is fitted up to the stock system?

Thanks. :thumbsup:

  • Team Xtreme
  • Donating Members
  • Member For: 20y 3m 9d
  • Gender: Male
  • Location: Perth
Hi GTP-330,

Have you got any photos of how this system of yours is fitted up to the stock system?

Thanks. :thumbsup:

Ill get you some next week before I strip it off for the next tests mate.

Also for those interested that price on SMB's web site for the cat of 382.00 is PLUS tax..

  • Member
  • Member For: 20y 8m 9d
  • Gender: Male
  • Location: Mildura

gtp, I guess the main question I wanna know is, if I was to replace JUST the CAT itsself with a high flow cat from STOCK dump to STOCK exhaust.. what would be the top 3 contenders?

#1 = SMB

#2 = ??

#3 = ??

I noticed a few other cats available on SMB site, their 3' hi flo's, would they be a good bold in replacement that would give a decent CFM increase?

  • Team Xtreme
  • Donating Members
  • Member For: 20y 3m 9d
  • Gender: Male
  • Location: Perth
gtp, I guess the main question I wanna know is, if I was to replace JUST the CAT itsself with a high flow cat from STOCK dump to STOCK exhaust.. what would be the top 3 contenders?

#1 = SMB

#2 = ??

#3 = ??

I noticed a few other cats available on SMB site, their 3' hi flo's, would they be a good bold in replacement that would give a decent CFM increase?

1= SMB 4 inch , Its by far the best ive seen and flow tested.

2= APS Cat.

3= Defilipo Gen III large body cat.

Cant go past the SMB

  • Donating Members
  • Member For: 21y 6m 20d
  • Location: Sydney
gtp, I guess the main question I wanna know is, if I was to replace JUST the CAT itsself with a high flow cat from STOCK dump to STOCK exhaust.. what would be the top 3 contenders?

#1 = SMB

#2 = ??

#3 = ??

I noticed a few other cats available on SMB site, their 3' hi flo's, would they be a good bold in replacement that would give a decent CFM increase?

1= SMB 4 inch , Its by far the best ive seen and flow tested.

2= APS Cat.

3= Defilipo Gen III large body cat.

Cant go past the SMB

Have you flow tested the aps cat at all?

It has a 3.5 inch opening but a 5 inch interior.

Personal testing I have conducted show no power gain without the aps cat at 350rwkw

  • Donating Members
  • Member For: 21y 8m 14d
  • Gender: Male
  • Location: Townsville

The actual SMB 4" cat is cheap, but what would the cost be to fit this to a standard system as it's not just a bolt in replacement?

Would it be better off price wise purchasing a complete system in the end?

Brett.

  • Member
  • Member For: 20y 1m 24d
  • Gender: Male
  • Location: New Zealand

Since we dont have testing on emissions (yet) in NZ - how much louder are our cars if teh cat is removed altogether?

Any other issues with no cat (assuming you have an edit)?

  • Donating Members
  • Member For: 20y 15d
  • Location: Canberra
The actual SMB 4" cat is cheap, but what would the cost be to fit this to a standard system as it's not just a bolt in replacement?

Would it be better off price wise purchasing a complete system in the end?

Brett.

That's a good question, I was wondering the same myself. Especially so if you decide to buy the matching 4" SMB dump pipe too! :laughing:

By the time you've done the centre muffler replacement too, you'll have spent in the order of $1500!! :blush:

  • Here since the start...
  • Lifetime Members
  • Member For: 22y 21d
  • Gender: Male
  • Location: Victoria

By the sound of GTP-330 hasn't taken out the centre muffler and is running 340rwkw's so just leave the buggar in there!

  • Team Xtreme
  • Donating Members
  • Member For: 20y 3m 9d
  • Gender: Male
  • Location: Perth
The actual SMB 4" cat is cheap, but what would the cost be to fit this to a standard system as it's not just a bolt in replacement?

Would it be better off price wise purchasing a complete system in the end?

Brett.

That's a good question, I was wondering the same myself. Especially so if you decide to buy the matching 4" SMB dump pipe too! :laughing:

By the time you've done the centre muffler replacement too, you'll have spent in the order of $1500!! :blush:

I get them fitted for 200.00 to the original system.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'