F6 UTE - Track Bound EVO III - Member 3,367 Member For: 21y 9m 11d Gender: Male Location: Strapped in and holding on Posted 15/07/05 05:32 AM Posted 15/07/05 05:32 AM Guys, needing more outlets in the ute.. I need to run PDA, Phone charger, GPS reciever and Radar detector, from ciggy adapters..Anyone made something of a 'hub' up for the rear section of a ute ( behind seats ) ?? sedan even? how would I go about it??Cheers..
xrdreaming Legacy Donating Member 1,693 Member For: 23y 7m 28d Gender: Male Location: Melbourne Posted 15/07/05 07:39 AM Posted 15/07/05 07:39 AM It would be pretty easy to make one mate. Dick Smith or Jaycar will sell the ciggy adapters you need or get some sockets from a wrecker or super cheap even.Make your box and mount you adapters together, wire them parallel and find a 12v feed to power them, you need to make sure that the circuit you choose has a big enough fuse to cope so you don't overload it.The other option would be to take power straight from the battery to power your devices (Using an in line fuse) and then use a 12 volt relay to interupt the circuit and power the relay from and acc source so that the power to the sockets will only be there when the ignition is in the acc and save your battery going flat.Cheers,Dean
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 21y 9m 11d Gender: Male Location: Strapped in and holding on Posted 15/07/05 08:06 AM Author Posted 15/07/05 08:06 AM Very good.. What do u reckon of pinching/splicing power from the elec drivers seat?? Shouldn't be much of a drain on that, seeing as it never gets used..
Grass Legacy Donating Member 447 Member For: 22y 7m 10d Gender: Male Location: Sydney Posted 15/07/05 10:10 AM Posted 15/07/05 10:10 AM True, but depending on the current you want, the cabling to the seats is pretty light.
ZAP No boost, no bottle, just my foot on the throttle! Legacy Donating Member 7,935 Member For: 22y 7m 13d Gender: Male Location: Sydney Posted 15/07/05 12:48 PM Posted 15/07/05 12:48 PM Rather than using ciggy lighter sockets, have you considered hardwiring he most used items ?The ciggy lighters are so ugly, you can bettr hide a hard wired solution.
mickq Member 740 Member For: 23y 5m 4d Posted 15/07/05 03:07 PM Posted 15/07/05 03:07 PM How about you get one of those 10+ outlet powerboards, cut and rewire it to your ciggy lighter plug, and then velcro the 10 outlet powerboard across the length of your dash?You sure use a fair bit of power!
xrdreaming Legacy Donating Member 1,693 Member For: 23y 7m 28d Gender: Male Location: Melbourne Posted 16/07/05 01:26 AM Posted 16/07/05 01:26 AM I'm pretty sure that's your mobile phone car kit adapter, here is a how to on installing the phone kit that will show you the pin outs.http://www.fordxr6turbo.com/forum/index.ph...ype=post&id=824
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 21y 9m 11d Gender: Male Location: Strapped in and holding on Posted 17/07/05 01:37 AM Author Posted 17/07/05 01:37 AM (edited) Rather than using ciggy lighter sockets, have you considered hardwiring he most used items ?The ciggy lighters are so ugly, you can bettr hide a hard wired solution.<{POST_SNAPBACK}>I have, yes.. But I want to be able to take the Radar Detector and GPS to other cars if needed, and hard wiring a phone charger?? meh.. Edited 17/07/05 01:40 AM by XRT UTE
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now