Jump to content

Recommended Posts

  • loitering with intent
  • Legacy Donating Member
  • Member For: 23y 1m 6d
  • Gender: Male
  • Location: Zombie Birdhouse
Posted

Hi guys, left for work this morning and it was more than a little cool, so I decided to put the heater on to warm things up a tad. Anyhow after about 5 mins it was still bllody freezing , no heat with either A/Con or off :spoton:

A/C works but only for cooling , I have tried every combination on the aircon and can only get cool/ cold air. So it appears that the temp dial thingee is on the fritz.

Just wondering if there is anyone out there who would know if it could be something else and is easy to fix , as I really dont want the Chimps at Ford pulling stuff out of the console and creating rattles if not necessary.

Also there are no coolant leaks or any water in the footwells

Thanks

Edit. Around 100m from leaving home there was a single beep from the dash, no warning lights etc.. dont know if this is related

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

  • FORD FORD FORD
  • Legacy Donating Member
  • Member For: 23y 6m 8d
  • Gender: Male
  • Location: Victoria Point In Brissy's eastern side
Posted

What about your warm sense of humour, LOL

  • .
  • Legacy Donating Member
  • Member For: 22y 10m 10d
  • Location: Sydney
Posted

I don't have a solution for you Julian, but I think it could be a common problem, mine had this problem as well. Never bothered to get it fixed though.

  • Formerly Turbo6
  • Legacy Donating Member
  • Member For: 23y 8m 17d
  • Location: North Brisbane
Posted

Hate to say this but.............. my heater core (behind the dash) shat itself when my car was but a puppy. It order to fix it, they have to remove the dash. I am not prepared for this to happen until I sell the car as I don't want any rattles! So, the heater pipes were just kinked and cut so no heater.

Besides, it doesn't get cold enough here in Qld anyway.

  • Moderating Team
  • Member For: 23y 7m 25d
  • Gender: Male
  • Location: Sydney
Posted

We fixed Aaron's heater recently, however I don't think it was a temp issue, it was a direction issue. Thought id pipe up anyhow and share the fix. Hope it helps.

There was a shaft that connects what the techs call a "HIM" to the actual ICC, the shaft had snapped. Unfortunately, I dont recommend you taking this job on Jewels, it isn't a 5 minute fix. Best be getting your friendly dealer to have a butchers hook, and attempting to properly diagnosing it.

I think that the new BA's also don't come with the good ol' heater tap anymore, which makes things harder again..... :spoton:

  • Faster than any BTA,XTC,Autotech, Nizpro and Tunehouse car
  • Member
  • Member For: 23y 3m 3d
  • Location: D SHIRE!
Posted

Drove a typhoon the other day heater worked bloody beautiful (hint hint):spoton:

  • Moderating Team
  • Member For: 23y 7m 25d
  • Gender: Male
  • Location: Sydney
Posted

We've got a nice silhouette GT-P out on the lot at the moment, got them ultra sexual chocolate 19in FPV wheels, I heard the heater is a cracker in that one too....

  • Member
  • Member For: 23y 9m 2d
  • Gender: Male
  • Location: Brisbane
Posted
Better solution dude MOVE, north coast preferable :-)

<{POST_SNAPBACK}>

:spoton: Move to queensland .. you probably won't need it then :spoton:

  • loitering with intent
  • Legacy Donating Member
  • Member For: 23y 1m 6d
  • Gender: Male
  • Location: Zombie Birdhouse
Posted
Drove a typhoon the other day heater worked bloody beautiful (hint hint):spoton:

<{POST_SNAPBACK}>

Where is that 6 speed auto :beeer: My signing finger is a gettin itchy :beeer:

Then off to Nizzers hopefully in early December , just in time for the XMAS run. Just hope the cold works as well :spoton:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...