Adrian6T

You'll be my backdoor

I hope not

Im baaaacccckkkkkk

:lazy:

Did it have a new head gasket fitted?

I had interest on the same day by the usual lowballing xr6turbo forum members.

Wow I just realised I first started on this forum 7 years ago. Time sure does fly.

Check the for sale threads you muppet

lol

haha yeah now they cant use that excuse any more. Everyone will probably say they have bald tyres or street rubber now.

Thanks mate. Someone shall be in touch.

Guys, A friend of mine has a little problem with a BA ute. Was originally a T5 5 speed that was converted to T56 6 speed in the usual fashion, which has now been swapped to a BTR 4 speed auto. The factory auto loom was already in the car from factory (which I found strange??) and all plugs are where they should be. He is running the factory manual ECU & BEM to suit, so car starts & runs but is stuck in Limp Mode… Has tried flashing a factory 4 speed tune in using HP Tuners software to no avail, and have also had it in at Ford to have a 4 speed base map flashed in by them with no luck. Anyone here successfully gone from manual to auto? If so, how did you get the auto to function properly & did you use the manual ecu or put an auto ecu in?? He has an auto ecu available to him, but this would require the ecu & his current bcm to be synced by Ford. To do this, he requires 2 coded keys which he doesn't have (only has one set as he lost the spare) & at a cost of ~$400 he doesn't really want to buy a second set to find out they can’t help with his current problem. Have been led to believe that a Scan Tool may read some useful codes that could point me in the right direction, anyone in WA have access to one?? Any help would be great. Cheers

Hey lazy. Do your homework. Also you are on a forum and there is only one sponsor from wa on here with nothing but good comments about them. Do you think that there is going to be bad things about them. By no means am I saying that xft are bad or anything, I'm talking about all sponsors on all forums.

I was at home mate. I heard there was a "C63" there however. I have an E55.

About time you did it properly. All those pieces look very similar.

When you run bugger all ponys they will last forever.

I would never skim the stock ford brembo disks. They are sh*t brand new and once skimmed they were not worth having on the car. New DBA 4000's are cheap.

haha THIS^^^^^ and THIS^^^^^

haha happy dyno much. I love seeing dyno queens posting how magical their dyno figures are then when it comes down to it in the end it has fark all. My BF F6 UTE had 367rwkw and ran an 11.22 @ 125mph in 25 deg ambient on BP98. The true power figure is the mph. Mate, you do not have 420rwkw, the graph does.

Hi mate, I just have a few questions. Whats the company name? What concrete supplier do you use? Holcim? Is it 80mm or 100mm thick? I am looking for min 100mm. Do you place mesh through out and lift them on stools? I am currently looking at getting my driveway done and around the side and back of the house. Designs are currently being developed.

XR6 Turbo 2004 to 2008 F6 Tornado 2008 to 2010 E55 AMG 2011 to present

That was my car before I bought my F6. I still like that car.

How was the car looking?

I have a brand new FPV rear badge for sale for any of you wannabes.$20 and its yours.