riki83

I was wondering where you guys had got to. Leave her in drive for the burnout and run with the traction on seems to be the way to go for now. I count myself lucky, in your lane and sideways up the track.....wouldn't have been a good start if I met the wall!!! lol I guess I will see you at the next one??? not to sure *Beep* on the others, 12.1 F6----12.2 mine----12.6 veva----12.7 bf xr6t-----13.9bf xr6t------13.7 ford maverick the rest I'm not sure mine 15.0--14.5--13.4--12.7---12.7--12.2

First run at WSID, first run was scary but in the end wasn't a bad night. Managed a 12.2 in the end. Left it in drive and and half to 3/4 trottle all the way home. Def needs some better tyres

I had mine at 338 with the turbo ported and actuator done. I have a built engine by atomic and had my turbo highflowed, upgrade comp housing and comp wheel, flapper and balanced and I now have 426rwkw. Jim from tune house said there is no problem with getting high 400's just need to change exhaust. by the way I am running the HDI cooler, so far not bad but limitations on other things with this cooler.

that's it I'm taking the tub of my ute, that's gotta help

I have 6's on an FG with fake 20's and I have mm or so. they arent going to move under load so should be fine

give me the all wheel drive set up on the territory and maybe

haha like it

Received correspondence back from WSID, another group have got the staging lane for the night so called off!!!

they cant tune your car with what you have? Seen your post

boys I'm in now, work schedule has changed so me plus 2 mates ant their cars WISE and JAY

Hey guys ford forums are havin a drag night on june 30th so far I have: vevapower, ben189, xr64lt, christianR and myself from here Spots are limited to fill the private lane at 20. its a first in best dressed and so far we have almost got our 20. any one else wanting to tag along?? will post up as soon as spots are full. thanks Ricky

I am a maybe guys, I have work commitments but should be all done by then

I have modded my fg xr6 turbo and I have a 4"dump, 3.5" cat and exhaust. its supported me to 426 rwkw so far but I need to go bigger to support me over 450+. I will be upgrading to a 4"dump, 5"cat and 4" system which will be plenty as my exhaust was holding me back from extracting everything this car has. The next step will be a bigger turbo but that's not going to happen. This ute is crazy to drive and the exhaust does sound pretty good. Most people think there is a screamer pipe on it!!

I will let you know as soon as wsid reply, fingers cross they put us in

XR66TI James ruse drive bout 3:30. He wanted to play but traffic!!!

FPV TOY at the ettamougah pub with the fams

Sucked big time we had our drag night cancelled but we are proposing another night, Wednesday 30th of june. The guys that were coming how is that date? any others in case spots dont fill?

DBA 5000s 2 piece on there way

another cheap upgrade, 6pot brembos and rotors $2100

All cancelled will post up when the next is on

thanks mate

different exhaust but factory turbo

Turbo has been ported, comp wheel and housing upgrade, high flowed and balanced but still the stock turbo and exhaust is 4" dump and 3.5" straight system but need to upgrade.

run in tune Final tune

After close to a month I have my ute back with 426rwkw, held back by the exhaust still with the stock turbo!!!! not bad next mod will be a 5" race cat and 4" system to see me over 450....and all on bp ultimate BBIIIGGG shout out to KArl from Hiro Performance for all the help provided through this build to get my car back on the road, without his great products and prices and network of people this would not have been possible!!! Brad from Atomic Performance Products for building my engine in under a week without even booking in!!! Jim and Tony from Tunehouse for their late nights to get my car to where it is now, 3 days of tuning after its run in and a finish time of 10:30 monday night so I could get it tuesday shows the length they are prepared to go and there passion for there product. 99.9% just isn't 100% and that's how JIm works. I would highly recommend all these guys to anyone considering getting their cars done.. Thanks guys