Tripple gauge pod on ICC on FG2

[Snowbear77]

Hey guys

 

I bought a pair of triple gauge pods to mount on top of my ICC over a year ago ( bought a spare, if I broke one ), obviously the easiet way is to just remove the ICC from the car and run the harness and remount the ICC., but I am concerned about all the things that can go wrong when playing with the ICC. Obviously after taking the top off, is it possible to just fish the harness down the passenger side of the ICC without removing the ICC? Obviously, I'm going to power it via the 'power source outlet ' on the middle console.

 

thanks

[k31th]

yeah, there's plenty of room behind the stock ICC to "fish"... but it's also not hard to take it out carefully so you don't damage any pins and even if you do take it out, thoroughly check the pins etc before pushing it back in. It's a low-risk item, realistically, as long as you're careful.

[Puffwagon]

Nothing will go wrong. Take it out, run your stuff and put it back. Be sure to grind enough out the top so you don't have to take it in and out 100 times.

[Snowbear77]

cheers