Fg Offsets And Tyre Questions

[bjwortley]

Ok thanks dude!

Sounds like fronts I could have almost pushed +20 front and +10 rear

[jgbender]

I put some 18x9.5 +18 Rota Grid-R on my fg sedan stock suspension. they sound like the rub when I turn but iv checked and they dont look like they do? and it seems to happen to one side more then the other? :/

[evo]

I put some 18x9.5 +18 Rota Grid-R on my fg sedan stock suspension. they sound like the rub when I turn but iv checked and they dont look like they do? and it seems to happen to one side more then the other? :/

My drivers side guard scrubs more than the passenger side. Its strange but the wheel sticks out a little more on one side, you'll find the rear is the same.

A lot of cars are like this.

[phatf6]

Running 19x9.5 +12 on the fronts with 245, fronts have a bit of poke,

Where can I get these wheels from ?

[Bellato]

Ebay has them but not in those sizes. Called BBS LM. A fair few companies make replicas

[jgbender]

Im gathering my wheel is rubbing on the strut.. the back fit perfectly. Anyone got any ideas to stop them rubbing or get them away from the strut. Dont want use spacers either.get the Grinder out? haha

[phatf6]

Ebay has them but not in those sizes. Called BBS LM. A fair few companies make replicas

I had the bbs lm replicas on my last car but had barely any dish compared to these and I had purchased the widest dish available from him

[Bellato]

^ did you have 8.5/9.5's though? You need 9.5/10.5 for good dish

[phatf6]

^ did you have 8.5/9.5's though? You need 9.5/10.5 for good dish

I had the 8.5s. The 9.5s only had 15 mm more dish though .. Can't seem to find anything wider than 9.5 on eBay..

[Bellato]

Ebay use to have the 10.5's but don't have them anymore. I know a company t and r autostyling sell BBS LM reps, not sure what sizes they have. Probably just have a search around on google