j.d Member 1,222 Member For: 16y 2m Gender: Male Location: Eastern Suburbs, Melbourne Posted 25/07/12 03:19 AM Posted 25/07/12 03:19 AM (edited) Just wondering if I could go 20"x9 on the front and 19"x10 on the rear, I'm planning on using enkei wheels or even 19" front and 18" rear with fat tyres for the purpose of going to track, and high wall tyres for the rear for launching now and then, would I be able to have the fg sit without having the back end lower than the front with the right profile of tires ? I'm willing to pump out guards as much as they can be with the fgDidn't read full post but yeah 20x9 up front and 19x10 rear will work just make sure rolling diameter works Edited 25/07/12 03:21 AM by j.d
Στέλ U1ARUN Member 192 Member For: 14y 4m 26d Gender: Male Location: Sydney, NSW Posted 25/07/12 12:25 PM Posted 25/07/12 12:25 PM Hey guys, I'm looking at putting 275/30/19 tyres on the rear of my FG & will be getting it lowered a inch or two as well. Does anyone think I'll have any problems? Thanks!
j.d Member 1,222 Member For: 16y 2m Gender: Male Location: Eastern Suburbs, Melbourne Posted 25/07/12 01:05 PM Posted 25/07/12 01:05 PM What rim width and offset ?
bossmang FREAKY Legacy Donating Member 12,441 Member For: 16y 9m 1d Gender: Male Location: Melbourne Posted 25/07/12 01:24 PM Posted 25/07/12 01:24 PM this ^^I have 275 on a 9.5inch
Στέλ U1ARUN Member 192 Member For: 14y 4m 26d Gender: Male Location: Sydney, NSW Posted 25/07/12 01:41 PM Posted 25/07/12 01:41 PM Here are details directly from the website. I will be running 245/35 on the front & 275/30 on the rear. Front Wheel Size: 19-inchesFront Wheel Width: 8.5-inchesRear Wheel Size: 19-inchesRear Wheel Size: 9.5-inchesStud Pattern: 5x114.3 PCDOffset / ET: 35Center Bore: 73.1
Worm A much better forum Legacy Donating Member 3,808 Member For: 18y 2m 4d Gender: Male Location: Victoria Posted 26/07/12 04:43 AM Posted 26/07/12 04:43 AM No... Will be fine
Στέλ U1ARUN Member 192 Member For: 14y 4m 26d Gender: Male Location: Sydney, NSW Posted 26/07/12 05:50 AM Posted 26/07/12 05:50 AM And the front will be fine also? I don't have to roll any of my guards if I am to lower it an inch or two?
j.d Member 1,222 Member For: 16y 2m Gender: Male Location: Eastern Suburbs, Melbourne Posted 26/07/12 07:58 AM Posted 26/07/12 07:58 AM Front offsets are same as standard 1
Στέλ U1ARUN Member 192 Member For: 14y 4m 26d Gender: Male Location: Sydney, NSW Posted 26/07/12 08:35 AM Posted 26/07/12 08:35 AM What about guard rolling for the rear?
SilkG6ET Member 43 Member For: 17y 1m 4d Posted 26/07/12 12:21 PM Posted 26/07/12 12:21 PM (edited) I have read this entire thread and coldnt find if anyone has tried a g6e turbo with:19 x 9.5 +40 285/30 on the rearNot lowered.Fitting the rim looks very close to the inside control arm.Great thread guys Edited 26/07/12 12:26 PM by SilkG6ET
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now