ROB83R Member 1,632 Member For: 10y 4m 5d Gender: Not Telling Location: Radioactive wasteland Posted 15/08/16 10:29 AM Posted 15/08/16 10:29 AM This is true. Have you got an xcal or is it tuned other ways?
spud13 New Member 23 Member For: 10y 7m 9d Gender: Male Location: Sydney Posted 15/08/16 10:47 AM Author Posted 15/08/16 10:47 AM it has a capa flash tuner in the cente console
ROB83R Member 1,632 Member For: 10y 4m 5d Gender: Not Telling Location: Radioactive wasteland Posted 15/08/16 12:37 PM Posted 15/08/16 12:37 PM Sct xcal same. Flash the standard tune into it and swap the motors over. You'll be fine with your bolt ons on a standard tune.
Panda Eyes flame magnet Legacy Donating Member 5,674 Member For: 18y 4m 8d Gender: Male Location: adelaide hills- 'race air' central Posted 15/08/16 08:03 PM Posted 15/08/16 08:03 PM On 8/12/2016 at 5:58 PM, ROB83R said: They are. You just can't lean on them as hard. You could go a reliable 300rwkw if the tune is right. What box have you got? That's the next weakest link. Go have a chat to Joe CMS and see what he reckons. you can go high 300's if the tune is right. ive been running 345rwk with the occasional 365rwk ethanol tune for ages...
ROB83R Member 1,632 Member For: 10y 4m 5d Gender: Not Telling Location: Radioactive wasteland Posted 15/08/16 10:02 PM Posted 15/08/16 10:02 PM I agree but it's still a gamble. Plus this is the perfect opportunity to upgrade to the better block.
Panda Eyes flame magnet Legacy Donating Member 5,674 Member For: 18y 4m 8d Gender: Male Location: adelaide hills- 'race air' central Posted 15/08/16 10:32 PM Posted 15/08/16 10:32 PM def a gamble... I'm in a position that if it goes pop I can upgrade to a new f6 engine. but if your not, then dont risk bigger power from a ba block. you play, you pay.
spud13 New Member 23 Member For: 10y 7m 9d Gender: Male Location: Sydney Posted 15/08/16 11:09 PM Author Posted 15/08/16 11:09 PM ive purchased a 45000xkm BF f6 engine with all accessories, bit the bullet, I couldnt go back to a ba motor knowing ide want to do boltons and chase 400+ down the track, really excited now! 1
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 21y 1d Gender: Male Location: Perth Posted 16/08/16 12:45 AM Posted 16/08/16 12:45 AM 15 hours ago, spud13 said: Ok so ive sourced an f6 BF motor with low kms, what do I need to do to make it work? What wiring harness do I need, computer etc to suit BA mk2 15 hours ago, ROB83R said: Does it come with the harness? I believe the pcm is different but harness same. 14 hours ago, spud13 said: ive read I can keep my ba computer, just have to get it tuned, it would need to be tuned anyway Harness is similar but slightly different due to Dual VCT. Just swap the BA Harness (assuming it's in good nick) onto the BF motor then swing it. Basically straight swap.
spud13 New Member 23 Member For: 10y 7m 9d Gender: Male Location: Sydney Posted 16/08/16 01:22 AM Author Posted 16/08/16 01:22 AM my ba harness is toasted unfortunately:(
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 21y 1d Gender: Male Location: Perth Posted 16/08/16 01:30 AM Posted 16/08/16 01:30 AM Bf harness can be modded to suit then VCT wiring will need to be combined and the second knock sensor wiring will need to be deleted or bundled out of the way.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now