Jump to content

Recommended Posts

  • New Member
  • Member For: 10y 9m 2d
  • Gender: Male

Hey fellow forum member,

I have a stock BF MKII XR6T which is the wife daily driver, and took it for a drive the another day and found that under heavy acceleration at around 3000rpm vehicle surged badly so I backed off. Took it to mechanic today an he has told me that fuel pressure was all over the place and recommend changing fuel pump and fuel regulator. I will be replacing the fuel pump with a Walbro GSS340 as I plan to do future upgrades (exhaust,FMIC and tune) but I can't seem to find an alternative fuel pressure regulator, will the standard fuel pressure regulator handle 12psi or is there an alternative fuel pressure I can install?

Thanks for any responses.

Edited by banoonie
  • Too heavy needs boost
  • Member
  • Member For: 11y 10m 20d
  • Gender: Male
  • Location: Adelaide

Do what bendoco did. He got in touch with herrods and got there pump and fuel reg and is pushing 400 so give them a buzz and see what they can do. His is fg so depends on what year the bf is not sure when they started to use the tank that's in the fg now.

  • MattyP
  • Cruise Control
  • Member For: 13y 1m 21d
  • Gender: Male
  • Location: Central Coast

Dont get a pump thatll be redunant at stage 1

Future proof mods and pumps arent expensive. Especially a 460 in standard swirl pot

  • Like 1
  • New Member
  • Member For: 10y 9m 2d
  • Gender: Male

So I replaced the fuel pump with a walbro 400 and larger swirl pot unit and got a fuel pressure reg from Ford. Installing the fuel pump was hassle free, when I got to changing the fuel pressure reg I noticed that the genuine unit had 4.0 bar stamped into the side of it. Just thought I would let you guys know as I thought I read somewhere on here that standard unit where lower than that.

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 17y 25d
  • Gender: Male
  • Location: Adelaide

No mate 4 bar is std ( 58psi ) is what the falcon needs to see in the rail

I really don't think you needed a new reg as they are very good reliable item in stock

I do think your pump may of been dying

Either way at least their new now

  • Member
  • Member For: 19y 8m 3d
  • Gender: Male
  • Location: 2 Dunorlan Road Edwardstown S.A. 08 82999998

Hi

We can suggest our Walbro 460 package

Includes;

  • Walbro 460 high flow high capacity, direct replacement intank fuel module
  • High flow 400lph direct fit pressure regulator / to correctly regulate the increased flow at correct pressure
  • Plug and play wiring / relay kit / to correctly handle the increased current
This No fuss properly engineered upgrade fuel system fits as factory and will support a standard vehicle perfectly and should you decide to upgrade in power later, levels up to 420-450 rwkw.

$895

Contact me dirct 08 82999 998 / orders@streetfighter.net.eu

or purchase oline

www/kpmmotorsport.com.au

WalbroPumpMedium_zpsa50a2cfc.jpg

Edited by KPM Motorsport

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'