Henz Tampon inserted, Auto Acquired, next purchase a new handbag Legacy Donating Member 9,946 Member For: 18y 6m 1d Gender: Male Location: Vic Posted 29/12/13 10:46 AM Posted 29/12/13 10:46 AM What offset are your rims. If high (+30-+40) then yes I think tyres will fix.
mikea1988 Member 102 Member For: 16y 11m 3d Posted 29/12/13 11:23 AM Author Posted 29/12/13 11:23 AM Rear is +40 mm
gaz097 Legacy Donating Member 1,752 Member For: 15y 2m 1d Posted 29/12/13 11:34 AM Posted 29/12/13 11:34 AM I dunno if this is possible but when I was fitting my wheels and didn't have access to a roller I was looking at taking 5mm off with a thin slitting disc back to the spot welds. Keep it cold with a wet towel on the outside and it can be done. Have to re seal the metal but that's easy
mikea1988 Member 102 Member For: 16y 11m 3d Posted 29/12/13 01:10 PM Author Posted 29/12/13 01:10 PM Gaz are u in melb?
mikea1988 Member 102 Member For: 16y 11m 3d Posted 29/12/13 11:03 PM Author Posted 29/12/13 11:03 PM What if I put 8.5 inch in the rear aswell instead of the 20 x 10's would that avoid any rubbing?
Pazzo Legacy Donating Member 11,132 Member For: 15y 10m 30d Gender: Male Posted 30/12/13 01:06 AM Posted 30/12/13 01:06 AM (edited) when I had my BF my rears were 20x8.5 and ran a 255/30/20... No scrubbing at all and had SSSL springs in it... Edited 30/12/13 01:06 AM by Pazzo
arronm Dropping a turd Legacy Donating Member 9,520 Member For: 18y 10m 25d Gender: Male Location: Perth Posted 30/12/13 01:46 AM Posted 30/12/13 01:46 AM (edited) http://youtu.be/1LdDAa6TNWEYep go with Pazzo. Make sure +35 - +45 Edited 30/12/13 01:51 AM by arronm
Pazzo Legacy Donating Member 11,132 Member For: 15y 10m 30d Gender: Male Posted 30/12/13 03:01 AM Posted 30/12/13 03:01 AM A good brand 255/30/20 would have more traction than a cheap Chinese or what ever is out there 275/30/20.
gaz097 Legacy Donating Member 1,752 Member For: 15y 2m 1d Posted 30/12/13 10:15 AM Posted 30/12/13 10:15 AM Nah nsw mate
mikea1988 Member 102 Member For: 16y 11m 3d Posted 02/01/14 05:15 AM Author Posted 02/01/14 05:15 AM My rears are 20x10 though not 20x 8.5 which is why I'm guessing you had no rubbing
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now