MexicanBatman G666E Turbo!!! Member 1,008 Member For: 15y 4m 20d Gender: Male Posted 16/02/12 08:23 AM Share Posted 16/02/12 08:23 AM Interested in your turbo upgrade, where you getting it from? Link to comment https://www.fordxr6turbo.com/forum/topic/78732-going-crazy-on-a-g6et-build/page/10/#findComment-1197186 Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 18y 11d Gender: Male Location: Melbourne Posted 16/02/12 08:28 AM Share Posted 16/02/12 08:28 AM Finally someone sees the light, not all about numbers or bragging rights.Oh and Jack I think Stainless is doing another lot of intakes soon, should get in on that. Link to comment https://www.fordxr6turbo.com/forum/topic/78732-going-crazy-on-a-g6et-build/page/10/#findComment-1197194 Share on other sites More sharing options...
G6ET8U Playing with Sports Bikes... Silver Donating Members 1,927 Member For: 19y 7m 7d Gender: Male Location: Whistling, GTX. Posted 16/02/12 08:45 AM Author Share Posted 16/02/12 08:45 AM Interested in your turbo upgrade, where you getting it from?It is through BPR mate. Brand new fitted with 8lb actuator, ported with bigger flapper already done. Having a quick peek in the engine bay while the car was on the dyno this afternoon... it's a big bugger! Certainly more noticable than the baby turbo. Turbo outlet pointing straight in the air and a clear Garrett written for all to see!Finally someone sees the light, not all about numbers or bragging rights.Oh and Jack I think Stainless is doing another lot of intakes soon, should get in on that.Thank Dillz, I am not in to who's dick is bigger etc... really in the end I have to live with it. I am the one that will get to smile when my garage door goes up at 5am every morning. Cannot wait mate.Jack Link to comment https://www.fordxr6turbo.com/forum/topic/78732-going-crazy-on-a-g6et-build/page/10/#findComment-1197224 Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 10m 14d Gender: Male Location: Victoria Posted 16/02/12 10:13 AM Share Posted 16/02/12 10:13 AM Why not fit a 12psi actuator? I didn't think 8psi actuator would hold 16psi??? Link to comment https://www.fordxr6turbo.com/forum/topic/78732-going-crazy-on-a-g6et-build/page/10/#findComment-1197294 Share on other sites More sharing options...
G6ET8U Playing with Sports Bikes... Silver Donating Members 1,927 Member For: 19y 7m 7d Gender: Male Location: Whistling, GTX. Posted 16/02/12 10:27 AM Author Share Posted 16/02/12 10:27 AM (edited) Why not fit a 12psi actuator? I didn't think 8psi actuator would hold 16psi???Moreso a question for Theo at BPR. I did ask though, it is basically the lowest point that the car can go down to when things go wrong if I recall correctly.Put a 15psi actuator in and the least amount of boost the car can run is 15psi, put a 12psi then the same applies. Things go wrong and the ECU knows about it and can correct it then it can't bleed enough boost off to fix the problem. That is basically how I recall the conversation.Jack Edited 16/02/12 10:33 AM by G6ET8U Link to comment https://www.fordxr6turbo.com/forum/topic/78732-going-crazy-on-a-g6et-build/page/10/#findComment-1197313 Share on other sites More sharing options...
wa g6et Member 657 Member For: 14y 3d Gender: Male Location: Perth NOR Posted 16/02/12 10:42 AM Share Posted 16/02/12 10:42 AM Hey Jack,The guys at Monsta Torque have the same idea about actuators, mine is 8 psi. Similar explaination too.Cheers David Link to comment https://www.fordxr6turbo.com/forum/topic/78732-going-crazy-on-a-g6et-build/page/10/#findComment-1197326 Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 17y 3m 26d Gender: Male Location: Sydney Posted 16/02/12 10:49 AM Share Posted 16/02/12 10:49 AM Beauty of a built motor you can start at a 14lb actuator!New Turbo on order to!8lbs will be fine mate as long as you don't want to go over say 18lbs! Link to comment https://www.fordxr6turbo.com/forum/topic/78732-going-crazy-on-a-g6et-build/page/10/#findComment-1197328 Share on other sites More sharing options...
Sam_boss260 Member 24 Member For: 13y 4m 9d Gender: Male Posted 16/02/12 10:57 AM Share Posted 16/02/12 10:57 AM Sounds like it's all coming together Jack.What XR8 air box do you have? Bigger snorkel and the lower half of the box with extra opening? 1 Link to comment https://www.fordxr6turbo.com/forum/topic/78732-going-crazy-on-a-g6et-build/page/10/#findComment-1197334 Share on other sites More sharing options...
G6ET8U Playing with Sports Bikes... Silver Donating Members 1,927 Member For: 19y 7m 7d Gender: Male Location: Whistling, GTX. Posted 16/02/12 11:08 AM Author Share Posted 16/02/12 11:08 AM (edited) Exactly that Sam. With K&N too... will be For Sale too soon...Jack Edited 17/02/12 02:06 PM by Dagabond Link to comment https://www.fordxr6turbo.com/forum/topic/78732-going-crazy-on-a-g6et-build/page/10/#findComment-1197342 Share on other sites More sharing options...
Sam_boss260 Member 24 Member For: 13y 4m 9d Gender: Male Posted 16/02/12 11:34 AM Share Posted 16/02/12 11:34 AM Might be interested... Link to comment https://www.fordxr6turbo.com/forum/topic/78732-going-crazy-on-a-g6et-build/page/10/#findComment-1197356 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now