The 400 Mission

[djqc]

Ive got a g6et with the following mods getting done

Plazmaman cold air intake

Plazmaman battery relocation kit

Process west stage 3 intercooler

Process west surge tank

Gtx 3582r 0.7 comp, waste gate port, flapper

4 inch dump, hi flow cat, twin 3 inch exhaust

Valve springs are on hand if valve float occurs

What are the predictions of power and torque?

What 1/4 mile time?

Next line of mods will be

Brake upgrade

Tailshaft upgrade

LSD upgrade

Suspension upgrade

Auto rebuild

Will post pics when I get the car back.

I work away and I don't collect the car until I get home, which is 3 weeks away. I'm like a kid at Christmas haha

[Dillz]

Put the valve springs in and should make four hundred?

[TRA1NR]

This thing is lining up to be pretty mean, interested to see the pics and results when you get it back!

[Henz]

With that exhaust you might get away with out v/springs, will be a wait and see thing. Who's tuning it & what fuel setup?

[234Fpv]

With injectors and valve springs I'd guess low 400's

[CHLAXN]

Good stuff mate should see 400 no worries.. Get the valve springs done if you got the coin saves getting them done later on when they go soft.. I am waiting for mine to turn up in the mail with the atomic tool then I'm doing mine. Good luck with it mate

[djqc]

Getting 1000cc injectors with upgraded fuel pump. I will be stoked to get to 400 and fingers crossed that I will get there. Monsta torque in Perth are doing the work on the car. Will definetly put some photos up and I want to get a video of a power run too.

Is there anything else that I should get while the car is in the shop

[Henz]

I'll take a punt at 405kw.

Seems like you have everything covered. Just add new spark plugs and cooler thermostat.

Edited 06/11/11 08:16 AM by Henz

[djqc]

Cooler thermostat is going in. Spark plugs are getting re gapped.

Will I make a 10 sec 1/4 with the single spinner diff?

[Henz]

I think rapid was running mid 11s with nearly 500kw with his single spinner. An LSD doesn't cost much.