Jump to content

Recommended Posts

  • Member
  • Member For: 18y 1m 4d
  • Gender: Male
  • Location: NSW
Posted

hi,

im after some brake pads for my 4pot brembo's ive got dba 4000xs rotors and currently using mintex pads which are very good once they heat up, but they a very noisy and are doing my head in.

Anyt recommendations for some good brake pads, that dont squeel n squeek and that are pretty good on dust. what do people think of bendix srt pads or genuine brembo pads. any help will be very appreciated. thanks.

  • Replies 30
  • Created
  • Last Reply

Top Posters In This Topic

  • Legacy Donating Member
  • Member For: 16y 1m
Posted

Dont go Brembo they as dusty as #uck !

Im using SRT's... admittedly on 6pots.. But great pedal feel, work from cold and reasonable dust.

Have previously used Red stuff pads but found them a bit harsh on the rotors

Hope this helps

  • Moar Powar Babeh
  • Legacy Donating Member
  • Member For: 20y 11m 26d
  • Gender: Male
  • Location: Perth
Posted

Remsa's IMHO best value pad for a street driven car with brembo's

http://www.remsa.com/index.php/mod.productos/mem.listado/relcategoria.1017/relmenu.20

available from

http://www.gslrallysport.com/shop/

Bendix SRT's will decimate your rotors

  • Moar Powar Babeh
  • Legacy Donating Member
  • Member For: 20y 11m 26d
  • Gender: Male
  • Location: Perth
Posted

Haven't tried then yet Phil. Greg from GSL and Matt from race brakes both warned me about noise/dust/wear with the hawk ceramics.

The Remsa where recommended as being easy on the rotors and they are quite cheap ($110 for a front set) so even if they have a shorter life at least they are low cost.

I would say the are average dust wise. But not as bad dust wise as the EBC's I have on the rear an they are a hell of alot quieter!

  • Member
  • Member For: 16y 3m 2d
  • Gender: Male
  • Location: Vic
Posted

I have been using Race Brake pads in my 4 pot Brembo calipers along with the DBA 4000 T3 Club Spec rotors for the last couple of months and couldn't be happier. I have had no noise and a very small amount of brake dust compared with the factory Ferrodo pads. Would suggest giving the guys at Race Brakes a call.

  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 3m 18d
  • Gender: Male
  • Location: Adelaide
Posted

iam with u youngy I got std brembo rotors but RACE BRAKES OWN BRAND PAD at 180 to my door overnight they are freaking wicked low dust no noise and bite excellent at cold couldnt be happier

  • Member
  • Member For: 18y 1m 4d
  • Gender: Male
  • Location: NSW
Posted (edited)

hey do they squeek jimmixr

Edited by ilco22
  • Member
  • Member For: 18y 1m 4d
  • Gender: Male
  • Location: NSW
Posted

I have been using Race Brake pads in my 4 pot Brembo calipers along with the DBA 4000 T3 Club Spec rotors for the last couple of months and couldn't be happier. I have had no noise and a very small amount of brake dust compared with the factory Ferrodo pads. Would suggest giving the guys at Race Brakes a call.

hey what is the brand of the pads you use? thanks

  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 3m 18d
  • Gender: Male
  • Location: Adelaide
Posted

did u even read what u quoted?.............it says race brakes brand like I also said :bangcomputer:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...