E Boost + Tach Adapter

[Ralph Wiggum]

No idea, but if you pop the coil cover off the wire you need is common to all coils and is larger diameter than the trigger wires.

Edit: I know Brendan has his now, set up next Saturday at his factory and I'll come and give you guys a hand to fit them.

[foxtrot]

Hi. If you are going to use just one coil to wire the tach adaptor in to you may as well just use the negative from one coil and set the "insert device here" to .5 pulses per rev (one pulse per two revs). The autometer unit gives 3 pulses per rev that gives a nice clean signal and a fast enough pulse rate at idle to stop a tach nedle bouncing arourd. Cheers MD