Jump to content

Post Your Street Tyred 1/4 Mile Time!


tonyv

Recommended Posts

  • Waiting for the 1st N/A 12!
  • Donating Members
  • Member For: 16y 2m 17d
  • Gender: Male
  • Location: Sydney

Yeah I was taking the piss a little with my revised topic title.

So because my NT05r's have load rating I can post this time?

In that case:-

FG F6

ZF

488 rwkws

60ft 1.750

ET 10.5 @ 138.8 mph

Tyres NT05r load range SL

WSID (migs F6)

.

Edited by Vevapower
Link to comment
Share on other sites

  • Idiot Member
  • Donating Members
  • Member For: 14y 3m 7d
  • Gender: Male
  • Location: Muswellbrook, NSW

I think Vevas right we need some control rules.

I dont think its about whos fastest at the end of the day. Yeah the fastest get kudos but I think anyone who runs in say 10.99 or faster should be in same group.

The Rh9 club gtr skylines are tuning shops in Japan that have run 9.99 or faster on street rubber. Sure they have 4wd so I think 10's is good for us to aim for.

The 245 our cars come equipped with is just bs. Corvettes, bmw's and supercars run massive rubber.

We should too. Ofcourse we are limited by what will fit in the gaurds.

As for wear rating I dont know much about it. I have seen tyres with lower numbers give worse traction than higher ones before.

Before we discredit people because of certain size, type, wear rating I think we all need to agree on rules.

What does others think?

Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 15y 10m 28d
  • Gender: Male
  • Location: Adelaide

Makes sence

Thought the 260 wear rating left it as a good guide

Width no issue just the compound type that seperates the soft sticky slicks from the harder street tyre class

Link to comment
Share on other sites

  • Waiting for the 1st N/A 12!
  • Donating Members
  • Member For: 16y 2m 17d
  • Gender: Male
  • Location: Sydney

Is a 305 260 rated tyre the same as a 245 200 rated tyre?

Point being width does play a roll in it.

Got get get a blanket for my box its really cold in there!

.

Link to comment
Share on other sites

  • RNS10S
  • Donating Members
  • Member For: 17y 8m 12d
  • Gender: Male

Didn't have the NT05's on at the last T&T! I had the new Invo's on. I did have the NT05's on that wed night 4 months ago when I had all those gearbox issues and the track was in awesome nik from the nitro camps that were on 3 days earlier.

I'm not trying to overcomplicate it I'm trying to lay down some control / baselines.

I guess an example of this is you've got 2 guys, same cars, same power, same trans, same skill level but one guy runs his factory dunlops and the other runs his 19 x 305's and turns to his mate and says "ha ha got you by half a second, told you you can't drive'

This is why the new 10.5 tyre class at the drags has become such an exciting bracket because they are all limited to a control tyre.

Maybe the topic should be re named to "post your 1/4 time NOT on slicks,MT's,ET's, semi slicks and tyre tread wear rating not under 240!

I'm all for guys driving to and from the track in full street trim and doing awesome times. Hell it's even.more impressive at time watching these guys actually having to pedal the car due to the car overpowering the Tyres.

Keep the banter coming and I'll step back now as I've had my 2 cents.

Off to get some 18 x 330's and run mid 10!

.

330's won't fit, 305's will !!!

Edited by rednose
Link to comment
Share on other sites

  • EPC Member
  • Donating Members
  • Member For: 15y 4m 25d
  • Gender: Male

car: bf foon

trans: tuned zf

power: 483 rwhp

tires: falken 452, 255 35 19 @50 psi

1/4: 11.99

first time been so time to be had there after some practice :)

Congrats mate, what mph and 60ft?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'