Highest Hp/Kw Ba/Bf

[Frostyboy]

Hi guys

just a quick question dose anyone know what the highest rwkw BA/BF 6 cylinder turbo is with a standard turbo?

I made 470rwkw at autosalon and so far it is the highest I have heard of.

cheers

[ratter]

standard unmodified turbo?

[bcl]

I doubt anyone would run over 350rwkw with a completely "stock" turbo on 98.

Flapper valve is a standard mod, and has been for 7 years.

People usually refer to standard as stock plus flapper mod only.

470 (assume 6f) out of a standard is very good, but often it depends on fuel used as to how much you can push it, and putting as much boost as you possibly get into it.

Brian

[TornadoJudd]

what other mods do you have mate

[Frostyboy]

I doubt anyone would run over 350rwkw with a completely "stock" turbo on 98.

Flapper valve is a standard mod, and has been for 7 years.

People usually refer to standard as stock plus flapper mod only.

470 (assume 6f) out of a standard is very good, but often it depends on fuel used as to how much you can push it, and putting as much boost as you possibly get into it.

Brian

I was running my F6 on E85 with a ported flapper no other modifications to the turbo

[Frostyboy]

what other mods do you have mate

My list of mods is on Xtreme Ford Tunings page under Autosalon also has dyno graph and videos

[Dirty32]

I doubt anyone would run over 350rwkw with a completely "stock" turbo on 98.

Im at 345 with only an actuator upgrade (12 psi actuator - but not the flapper mod).

Going for a retune very shortly so hopefully I nudge a touch over the 350...

470 is very, very huge for a standard turbo though!

Edited 18/08/10 05:33 AM by Dirty32

[JETURBO]

E85 FTW