Ba F6 Typhoon 2005 X2

[tray_182005]

This is great advise . But as u no thing get out of hand n just just send spend spend trust me.

Have u looked at hi torque they do some nice work as well.

[bcl]

The COBRA (and APS) kit were at their peak from 2003 to 2006.

The power level you are after is now not considered a big power upgrade.

There are many more component options around today to get your desired power levels and suit your requirements at a lower cost level.

Not sure why you’d go with BTA as a choice in Sydney. They would rank below Autotech, C&V and Tunehouse, who have far more experience in Sydney (and these are our forum advertisers that we support), and who have been tuning our Ford turbo cars for 7 years now.

IMO, you’re much better staying in your own state, for continuing support, and there are competent tuners in Qld.

IMO, for your requirements, tuning capability and good customer service are more important than which IC, exhaust, or plenum you may chose, for which you have many options, and a good workshop should be able to give you the advice you need. Even a full 4” exhaust is overkill for what you require, although quite often once we get used to a power level you tend to want more.

Don’t ignore suspension and brakes, and be more careful in the wet.

Brian

[SPIKO]

Who is BTA?

[navagator77]

Thanks Guys for the reply...

BTA is some place in Sydney...

Personally I don't like the Cobra kit's that's why I wanted something different from the Boss...

I Have have everything sorted and will be tuned in Brisbane...

I'm getting

Large Inter cooler

Plenum

Battery relocation kit

Air intake of the turbo

The ABOVE from Plazmaman Kit

Race Valve Springs

60ld Siemens DEKA

3'5" Exhaust stainless

surge tank including 044 pump

Porting of Turbo and install of larger flapper

Flash Tuner

12lb actuator

If I have to spend a bit more...It's all good...

Installed and Tuned Right here in QLD

Edited 11/02/10 03:54 AM by navagator77

[SPIKO]

It sounds like you have made the right choice, good luck with the mod's, keep us posted...

[navagator77]

Thanks I'll keep everyone posted

[bluprinturbo]

go hi-torque,chiptorque or bps for your tune mate.

[ravenhard]

getting a tune done in another state when you have the option of getting a tune done in your own is absolutely ridiculous. I had the choice of 2 sydney tuners, one 20mins drive and the other 1 hour drive, with very little in price difference. I chose the cheaper one but cost me more in time due to having to go back to the tuner 4 times after that to fix up little issues with the tune. Each 1 hour drive I was cursing the tuner for being that much further away.

I couldnt imagine if he lived 1000ks away and had to fix and diagnose problems that far away

[tray_182005]

That is good in hiensight . But what if this happened with the turner that is 20 min away and u had to go back n forth when the 1 who is an hour away has a better turner u only have to get the job done once . But with what ever way u go I hope it go's good for u mate even to better turner make mistakes