My questions is, What is the quickest F6,XR6T in manual on street tyres only.

Yes I know the quickest is 11.1 on slicks etc, but I have other plans on my mind before moving onto racing with slicks at this stage...

With only running 283rwkw, with 60% tread left on street trim tyres, track was also a little slippery, I managed to pull a 12.80 114MPH, which I was quite happy with regarding these conditions.

Edited January 28, 201016 yr by NFORCD

rapidchris ran 12.2@125 on 20,s in his man t

cheers lee

Edited January 28, 201016 yr by dalts

So this is the quickest in Aus???

And no one has pulled a quicker time down the 1/4?

Edited January 28, 201016 yr by NFORCD

not sure mate.. I run a 12.4 manual on 20's lol.

What "street tyres". Most guys run on MTs, which are technically not street legal, although we refer to them as street tyres, because they are not slicks.

Brian

I know that most people run on MT's mate.

"Street tyres"

- With everyday tyres that we use on the road, not MT's or anything. Do not know how to simplify this anymore to you.

Was just trying to figure out if anyone has ran a 11sec down the quarter without SLICKS....

Edited January 28, 201016 yr by tab
Quote removed

wasnt your 138mph run on street tyres brian?

Going by his sig, looks like he has ran 11.93 in with normal tyres since it doesn't say MT's????

Is this correct Brian? if so, it beats;

rapidchris ran 12.2@125 on 20,s in his man t

Yes I ran a 138mph pass and an 11.9 pass on some 100% street legal Toyo tyres, stock 6-speed manual with 3.73 diff and full weight.

After that I tried some MT's but still way too much wheel spin at the power level around 600rwkw.

Brian

Yes you're reading correctly, he needed over 500rwkw to get an 11.9 on street legal tyres. Hence manuals suck for the 1/4 mile, and then there's the breakages lol