Bigkeels Throbbing Member Legacy Donating Member 594 Member For: 17y 7m 16d Gender: Male Location: Victoria Posted 13/07/12 11:07 AM Posted 13/07/12 11:07 AM Yeh I didn't think it would be hard, just a few screws under the garnish. Someone told me the vct was a bitch to undo or something
lrmcdowell Legacy Donating Member 730 Member For: 15y 26d Gender: Male Location: Randwick, sydney Posted 13/07/12 10:48 PM Posted 13/07/12 10:48 PM upgrades!! 2
ebxmple Member 1,322 Member For: 18y 7m 21d Posted 14/07/12 01:09 AM Posted 14/07/12 01:09 AM The Nizpro garnish doesnt run the rubber seal,but I did put the little rubbers on that sit on top of the coils.Yeah,once the garnish is off,theres 4 x 7mm bolts that hold the vct phaser seals on, 2 x T40 torx bolts at the front and I think 6 x 10mm bolts for the rest. Once you get all the bolts out,pry the phaser seals out gently and then push the rocker cover back,then up. Just be carefull when putting it back on,as the gasket can fall off at the back and piss out oil. Oh and where the timing cover meets the head,put a bit of sealant across the join.. You will see the sealant there anyway,so just clean off and apply some fresh stuff.
MX Dave Legacy Donating Member 545 Member For: 15y 5m 16d Gender: Male Posted 14/07/12 07:50 AM Posted 14/07/12 07:50 AM Yeh I didn't think it would be hard, just a few screws under the garnish. Someone told me the vct was a bitch to undo or somethingYeah there's little seals that go around the vct plugs that you gotta get out. I can't remember exactly but I think tey are held in with little 8mm bolts then you flick the seal out. (gently) reinstall with some blackmax and all good
neotim Member 276 Member For: 15y 7m 10d Gender: Male Location: Gold Coast Posted 15/07/12 08:05 AM Posted 15/07/12 08:05 AM upgrades!!Looks Porn! Love the massive front mount. Happy with the rapid kit? 1
lrmcdowell Legacy Donating Member 730 Member For: 15y 26d Gender: Male Location: Randwick, sydney Posted 15/07/12 08:47 AM Posted 15/07/12 08:47 AM yeah. was a nightmare to install as the cooler pipes didnt fit around the fog lights so cost like double to get it installed but thankfully chris has helped me out and sorted me out with some goodies 1
shaneo_1 Member 108 Member For: 19y 6m 17d Posted 16/07/12 09:13 PM Posted 16/07/12 09:13 PM my old beast with just recently sold2nd pic is with engine cover I made just not painted and unfished 1
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Legacy Donating Member 9,946 Member For: 18y 6m 1d Gender: Male Location: Vic Posted 16/07/12 09:41 PM Posted 16/07/12 09:41 PM Love it Shane, how I want mine.
shaneo_1 Member 108 Member For: 19y 6m 17d Posted 17/07/12 10:34 AM Posted 17/07/12 10:34 AM Yeah my new setup will be very similar and my old 69 falcon
Riff Legacy Donating Member 670 Member For: 15y 15d Gender: Male Location: Melbourne Posted 28/07/12 04:34 AM Posted 28/07/12 04:34 AM Finally pic of the engine bay! 3
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now