Jump to content

Recommended Posts

  • Legacy Donating Member
  • Member For: 19y 6m 1d
  • Gender: Male
  • Location: Brisbane, Queensland
Posted

a mate got a custom 9 inch conversion done on his BF Mk1 ute.

pretty sure it cost him 4400.

and he's still got around another 1200 to go finishing off the front tailshaft section.

  • Replies 31
  • Created
  • Last Reply

Top Posters In This Topic

  • Member
  • Member For: 18y 5m 18d
  • Gender: Male
  • Location: Ipswich, QLD
Posted (edited)

Getting a billet centre with 3.4 diff gears and having my cv's/axles rebuilt. They were all flogged out so they both had to go, but looks like they can be repaired.

The diff is costing me $4000 plus all the mounts and rubbers etc.

EDIT: This is what my diff looked like, it came out literally like this - the mechanic hasnt pulled apart a thing.

4936_113129262068_590342068_3435557_4382771_n.jpg

The 9 inch conversion was really starting to push the $$$ mark too high, it got up to around $9,000 and that wasnt everything included, and I think there was labor on top of that, but I cant remember, I didnt pay much attention to that quote.

My current quote is for a billet centre with 3.4 gears, have to get my axles/cv's rebuilt and all new bushes, rubbers and mounts - total bill for that is around $7,000....

Edited by revheadrobbo
  • Legacy Donating Member
  • Member For: 21y 3m 12d
  • Gender: Male
Posted (edited)

um wow that's high.

you can get complete rear ends from wreckers over here for like $1200. that includes a centre and cv's and crossmember and bushes and brakes etc

I would be looking at a cv upgrade like the albions ones, which use the stock shafts, that's around $1k I think.

Edited by XR06T
  • Legacy Donating Member
  • Member For: 19y 9m 5d
  • Gender: Male
  • Location: Wollongong
Posted

Certainly smashed it. Gives you an excuse to build a bullet proof one anyway.

  • Member
  • Member For: 22y 26d
  • Gender: Male
  • Location: Mildura
Posted

lol... that's a good effort!

id just be getting a new centre from a wrecker... u seem to be going the expensive route for nothing.

  • Legacy Donating Member
  • Member For: 19y 23d
  • Location: Richmond, Melbourne
Posted

Woah, that diff is mashed!

In all honesty, how hard were you pushing it? and at what point did it blow?

Also, how much power are you running?

  • Member
  • Member For: 18y 5m 18d
  • Gender: Male
  • Location: Ipswich, QLD
Posted

About 320rwkw give or take. Was coming out of a set of lights, wasnt exactly getting up it, but wasnt going slow (no tire spin) and when I shifted into 2nd it just happened - so about 60k's I guess?

Prices are getting cheaper, now down to $6,000.

that's not standard parts either, that's stronger, beefier parts.

  • Forged Member
  • Legacy Donating Member
  • Member For: 19y 7m 27d
  • Gender: Male
  • Location: SW Sydney
Posted

Moose, I've just merged your two threads

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...