Jump to content

Recommended Posts

  • Member
  • Member For: 18y 6m 28d
  • Gender: Male
  • Location: Mackay
Posted

posted in the FPV section too but I'm just so proud!!! 380RWKW!!!!

BF R-spec Typhoon 6 speed auto: Process West race plenum kit

Process West surge tank

X-Force 3.5" system with 4" dump

60lb semins injectors

12psi actuator and ported wastgate

Flash Tuner 2

And a big thanks to Dave from CPV Tuning for all his advice and time spent on the tuning. Couldn't be happier with the results............well maybe if I can net a low 11 or even a 10.9 at the strip.!!!

post-14674-1214133381_thumb.jpg

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

  • Legacy Donating Member
  • Member For: 21y 23d
  • Gender: Male
  • Location: NSW
Posted

Very nice.

Have fun and take care, it can get you into trouble if you're not careful.

  • Forged Member
  • Legacy Donating Member
  • Member For: 19y 7m 18d
  • Gender: Male
  • Location: SW Sydney
Posted
:stupid: you have the power and box to get a low 11 with some M/T streets, get out there and have a crack while the weather is cold!
  • Member
  • Member For: 20y 7m 28d
  • Gender: Male
  • Location: West Dapto
Posted

Well done, nice result boys. I have almost the exact same setup just a few little changes :stupid:. Now I know what I can expect from my car which should be running in the next few days, ready for tuning next week. Good luck at the strip.

  • Legacy Donating Member
  • Member For: 19y 1m 7d
  • Gender: Male
  • Location: Broady, Melbourne
Posted (edited)

Why taper boost off? You could have made 400 ;)

But, very nice. Have fun, get a tyre sponsor and drive carefully...

Edited by straughsberry
  • Member
  • Member For: 19y 7m 24d
Posted

another happy blueboost customer!

but I thought the process west race kit would have made more than that?

can you comment dave? or is it just that it takes more than just a quick dyno pull to really heat up the cooler?

also, you dynoed it in 4th instead of 3rd which seem to be the norm in the ZF? im guessing wheelspin stopped you? would that have affected the numbers, in theory its not supposed to matter what gear you run it in?

  • Legacy Donating Member
  • Member For: 22y 7m 24d
  • Gender: Male
  • Location: brisbane
Posted

top result!!!! well done!1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...