sct911 Member 848 Member For: 13y 10m 11d Gender: Male Posted 24/03/13 09:57 AM Posted 24/03/13 09:57 AM (edited) Yea I agree with willow get rid of the pipe and put the stopper straight onto the crossover!I run my bov vented but tempted to block it up just for sh*ts. I still worry that a blocked/no bov isn't good for the turbo cant be that bad if you drive the car normally 95% of the time, I did it just for the sh*ts n giggles. Love brake boosting past people that have windows down :D, especially hsv's Edited 24/03/13 09:59 AM by sct911
ford number 1 Legacy Donating Member 602 Member For: 22y 19d Gender: Male Location: N/W Sydney Posted 25/03/13 06:49 AM Posted 25/03/13 06:49 AM I went to bunnings and bought parts for this mod today.Nice easy mod for abit of noise till I buy 4inch intake or street airbox.
hoarspower Member 478 Member For: 15y 5d Gender: Male Location: brisbane Posted 31/03/13 12:50 AM Posted 31/03/13 12:50 AM ">http://Vented correctly?
Bellato Legacy Donating Member 2,713 Member For: 15y 10m 29d Posted 31/03/13 08:17 AM Posted 31/03/13 08:17 AM Yep! Blocked mine off for sh*ts! Don't mind the flutter but will go back to vented soon
Bonjaz Legacy Donating Member 1,841 Member For: 17y 9m 10d Gender: Male Location: CQ Posted 31/03/13 12:58 PM Posted 31/03/13 12:58 PM I run mine blocked with 400kw, wats the worst that could happen it blows and I have to get a gtx? 1
terra88 Member 14 Member For: 13y 5m 30d Gender: Male Location: Sunshine Coast QLD Posted 03/04/13 08:37 AM Posted 03/04/13 08:37 AM Hey all, I'm only new to Fords and just got myself a TTG and the vacume hose to the BOV is tied in a knot?I have read that you guys disconnect them and vent the factory BOV for more noise , but I always thought that you need that vacume hose connected to the other side of the BOVs's piston to keep it shut during boost? Are the factory ones setup different to aftermarket ones?
DR1986 New Member 16 Member For: 13y 8m 9d Gender: Male Location: Melbourne Posted 01/05/13 04:15 AM Posted 01/05/13 04:15 AM One thing I cant find the answer to in this thread is what should be done with this...And are people blocking off the removed rubber pipe with a small screw/bolt?
Bellato Legacy Donating Member 2,713 Member For: 15y 10m 29d Posted 01/05/13 05:02 AM Posted 01/05/13 05:02 AM Why are you removing that rubber pipe? The venting is from the outlet of the BOV to the intake, changing that is where the sound comes from
DR1986 New Member 16 Member For: 13y 8m 9d Gender: Male Location: Melbourne Posted 01/05/13 05:24 AM Posted 01/05/13 05:24 AM My system is still stock, I havnt performed this mod yet but am thinking about it.After I have done everything in the first post does anything need to be done to what I pointed to in the picture? should it be blocked?
DR1986 New Member 16 Member For: 13y 8m 9d Gender: Male Location: Melbourne Posted 01/05/13 06:37 AM Posted 01/05/13 06:37 AM Why are you removing that rubber pipe? The venting is from the outlet of the BOV to the intake, changing that is where the sound comes fromOk my bad, so this stays connected always, in the first post it looks as if it has been disconnected.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now