mob-z Member 6 Member For: 17y 5m 4d Posted 24/01/08 03:58 AM Share Posted 24/01/08 03:58 AM heys guys n gals, just wondering if anybody is running a T04Z turbo in there xr6t or f6 phoon? if so, how much more lag does it have over the top stock set up and how much more top end ect.?cheers Link to comment https://www.fordxr6turbo.com/forum/topic/41985-t04z/ Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 18y 3m 13d Gender: Male Location: SW Sydney Posted 24/01/08 04:12 AM Share Posted 24/01/08 04:12 AM I don't know of anyone running a T04Z, but they are an awesome turbo, and I don't think the size would be much different really, and judging by what they do on RB and 2J motors, it should be boosting by 3000rpm, but there are so many variables ie tune, exhaust, plenum, cooler etc - all these things will vary how and when the turbo comes on Link to comment https://www.fordxr6turbo.com/forum/topic/41985-t04z/#findComment-624844 Share on other sites More sharing options...
ETM Member 1,194 Member For: 18y 2m 7d Gender: Male Location: syd south Posted 24/01/08 05:26 AM Share Posted 24/01/08 05:26 AM a t04z is a natural first choice in turbo upgrade with these engines,its rated at 700hp,100hp more than a gt35r so it will provide badass topend without sacrificing too much down low.on a well designed exhaust manifold I believe you could have it boosting up at the same(or very close to) rpm as the standard gt35 does on the factory cast manifold but with all the benefits of an extra 100hp. Link to comment https://www.fordxr6turbo.com/forum/topic/41985-t04z/#findComment-624890 Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 18y 3m 13d Gender: Male Location: SW Sydney Posted 24/01/08 05:35 AM Share Posted 24/01/08 05:35 AM etm, do you know if the flange on the T04Z is the same as the 35/40? if it was, it might be something for people to look into, but I'm pretty sure these only come as an externally geted turbo - is this correct? Link to comment https://www.fordxr6turbo.com/forum/topic/41985-t04z/#findComment-624893 Share on other sites More sharing options...
ETM Member 1,194 Member For: 18y 2m 7d Gender: Male Location: syd south Posted 24/01/08 06:32 AM Share Posted 24/01/08 06:32 AM etm, do you know if the flange on the T04Z is the same as the 35/40? if it was, it might be something for people to look into, but I'm pretty sure these only come as an externally geted turbo - is this correct?you will not get a t04z with a t3 flange(as used on the gt3582r fitted from the factory).they come with a t4 flange which means its going to need a new manifold,you would really want a better flowing manifold than the cast log anyway at those power levels.same as the wastegate,its going to be external,internal gates suck at the best of times and a t04z is no place for an internal gate. Link to comment https://www.fordxr6turbo.com/forum/topic/41985-t04z/#findComment-624920 Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 18y 3m 13d Gender: Male Location: SW Sydney Posted 24/01/08 06:42 AM Share Posted 24/01/08 06:42 AM Pretty much what I thought, might have a chat to you soon about my other project Link to comment https://www.fordxr6turbo.com/forum/topic/41985-t04z/#findComment-624925 Share on other sites More sharing options...
2MUCHKW Member 350 Member For: 19y 1m 1d Posted 25/01/08 05:44 PM Share Posted 25/01/08 05:44 PM a t04z is a natural first choice in turbo upgrade with these engines,its rated at 700hp,100hp more than a gt35r so it will provide badass topend without sacrificing too much down low.on a well designed exhaust manifold I believe you could have it boosting up at the same(or very close to) rpm as the standard gt35 does on the factory cast manifold but with all the benefits of an extra 100hp.Hi bloke,What $$$ would I be looking at for you to build a well designed exhaust manifold to suit a TO4Z for my BF Typhoon?Have you built any to this combination yet?Cheers Link to comment https://www.fordxr6turbo.com/forum/topic/41985-t04z/#findComment-625614 Share on other sites More sharing options...
Weeman Member 72 Member For: 18y 8m 4d Gender: Male Location: Parkes NSW Posted 27/01/08 06:14 AM Share Posted 27/01/08 06:14 AM (edited) I was believe master G runs a T04Z on his xr6t.I could be wrong, pm and ask him Edited 08/06/08 09:35 AM by Adam Link to comment https://www.fordxr6turbo.com/forum/topic/41985-t04z/#findComment-626102 Share on other sites More sharing options...
rapidute Member 54 Member For: 20y 13d Location: nsw Posted 27/01/08 08:53 AM Share Posted 27/01/08 08:53 AM im running a to4z on my ute on a custom log manifold and tial wastegate and this setup spools just as fast as the 35/40, boost is controlled by a eboost 2.cheers geoff Link to comment https://www.fordxr6turbo.com/forum/topic/41985-t04z/#findComment-626157 Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 22y 1m 20d Gender: Male Posted 28/01/08 02:29 AM Share Posted 28/01/08 02:29 AM What exhaust A/R are you running and is your log manifold split pulse also Link to comment https://www.fordxr6turbo.com/forum/topic/41985-t04z/#findComment-626413 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now