BA_XR6Turbo_Ute Member 106 Member For: 21y 16d Location: Sunnybank, brisbane Posted 06/06/07 06:57 AM Posted 06/06/07 06:57 AM Anything happening with these gauges??
kissy Member 132 Member For: 19y 6m 7d Gender: Male Location: S.E. Melbourne Posted 12/06/07 06:32 AM Posted 12/06/07 06:32 AM (edited) I'll have two of these when you sort out the issues you have getting them to work properly.It'll be good to know what they can read, I hope the read out, boost, oil pressure, engine temp, I couldnt care about the rest, but engine oil temp would be good too!!! Edited 12/06/07 06:34 AM by kissy
Dillz Three pedals are better then two.. Legacy Donating Member 15,637 Member For: 19y 3m 26d Gender: Male Location: Melbourne Posted 12/06/07 06:42 AM Posted 12/06/07 06:42 AM This has probably been asked but do they come with pod and can it be adapted for boost?
CSV_LS1 Member 303 Member For: 22y 6m 19d Gender: Male Posted 12/06/07 07:58 AM Posted 12/06/07 07:58 AM I was told the CANBus is too slow and won't be any good since it won't refresh quick enough.
Robit28 Member 385 Member For: 20y 10m 22d Location: Brisbane Posted 15/06/07 11:55 PM Author Posted 15/06/07 11:55 PM Hi Guys, sorry that this thread has become rather slow. I am still awaiting the Can Bus version to come to me from the states. The company that supplies them has been a little slow at replies and therefore I am finding it hard to communicate.I have chased them a few times and they advise that they are being tested in the states before release in Oz, although this was some time ago.I will shoot off an email to them advising that we are all awaiting these gauges and see what I get.Rob.
Robit28 Member 385 Member For: 20y 10m 22d Location: Brisbane Posted 24/01/08 12:06 PM Author Posted 24/01/08 12:06 PM Hi All,Just thought I would post up a couple of pics of the gauges installed into the Phoon.Unfortunately the gauges are currently iimperial but will get changed over as soon as metric is available.I think they look great and are much more usefull than the phoon oil and boost gauge.Ran down the quarter mile on the weekend and the gauges are around .4 of a second faster than actual times, good for testing though and 0-100 times are acurate.Let me know what you think.Rob.
mbjunior99 Member 4,359 Member For: 23y 8m 29d Gender: Male Location: Brisbane Posted 24/01/08 12:09 PM Posted 24/01/08 12:09 PM Love it Where would one get a set of these from?
ZAP No boost, no bottle, just my foot on the throttle! Legacy Donating Member 7,935 Member For: 22y 7m 7d Gender: Male Location: Sydney Posted 24/01/08 12:21 PM Posted 24/01/08 12:21 PM So they finally have made them.....a year later.I have been waiting for them for quite a while, might need to order me a set.How does the ODBII cable sit behind the fusebox ?Also is it hard to run the cable to the gauges ?
Robit28 Member 385 Member For: 20y 10m 22d Location: Brisbane Posted 24/01/08 12:49 PM Author Posted 24/01/08 12:49 PM The OBD plug is a right angle plug so it sits nicely behind the fuse panel without any fouling.The cable was a bit of a pain to run as you need to get it up to the top of the dash. I took out the ICC and it was then easily accessable. Then just cable tied the cable to existing cable in the car.I got them on the web at XTreme Auto Gauges Australia.Rob.
tab Sucker Moderating Team 32,303 Member For: 22y 4m 27d Gender: Male Location: Brisbane Posted 24/01/08 02:33 PM Posted 24/01/08 02:33 PM Impressive How many beer tokens are you looking at for the little suckers?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now