bionicxr6t05 Legacy Donating Member 2,216 Member For: 15y 1m 20d Gender: Male Posted 26/07/12 10:56 AM Posted 26/07/12 10:56 AM I agree I have the powerbond kit, mostly for the balancer but the underdrive is good, only thing I notice is the steering gets slightly heavier if the revs drop at idle, we bumped up the idle a bit to counteract this. Bf1 stock bottom end 385rwkw
XR6menace BANNED Banned 1,462 Member For: 19y 4m 19d Gender: Not Telling Location: banned Posted 26/07/12 10:58 AM Posted 26/07/12 10:58 AM Correct if you have an x-cal3 bumping the idle to 800rpm fixes this...
bionicxr6t05 Legacy Donating Member 2,216 Member For: 15y 1m 20d Gender: Male Posted 26/07/12 11:02 AM Posted 26/07/12 11:02 AM Vcm for me
arrow24 Member 41 Member For: 14y 3m 5d Posted 18/09/12 07:46 AM Posted 18/09/12 07:46 AM hey guys seems the underdrive pulley is a must have for an n/asearched the forum and read as much as I could hahbut still have a few more question where have you guys purchased your underdrive pulley kits from?what brand? had a look on ebay found one from a seller tuffcar parts, brand (powerbond).also read about 20% and 25% kits but can only seem to find the 20%....which ones do you reccomend?what should I expect to pay?and lastly is it a DIY job, or will I have to have it installed...watched a vid on you tube and seemed pretty easy lolcheers justin
jayyraad Member 19 Member For: 14y 14d Posted 18/09/12 10:49 AM Posted 18/09/12 10:49 AM Iv looked at one too.. Powerbond is reputable. And yes prob worth it. My.mate has a powerbond underdrive kit on his mk2 gt... Revs pick up fair bit quicker. The balancer is at least half the weight of the factory balancer. If you are unsure. Look at atomics balancer they are the best and you can never go wrong with any of there products. As for the removal. Yes quite easy however you do need a special tool to remove the balancer. Normal balancer pullers are too big and or dont lock in behind it properly and.you will fk it up.
Bazza96 Member 41 Member For: 13y 8m Posted 11/08/13 08:08 AM Posted 11/08/13 08:08 AM So guys, im looking at fitting an 20% Underdrive Pulley, I seen that video at CV Performance, and that car made 9.5rwkw?Has anyone else seen these figures? Is it worth the money?
Bazza96 Member 41 Member For: 13y 8m Posted 11/08/13 08:11 AM Posted 11/08/13 08:11 AM And also, because I do not want to make another topic.. The Fibreglass FPV Front and Rear Bumper?Has anybody had any experience with these?If Fibreglass is a no, does anyone know where to buy plastic ones? Cheers.
jacobmitchell92 Legacy Donating Member 370 Member For: 15y 5m 5d Gender: Male Location: Perth Posted 11/08/13 08:31 AM Posted 11/08/13 08:31 AM What car is it in mate? If its a turbo don't do it. It's not worth it, it can actually damage the engine
Bazza96 Member 41 Member For: 13y 8m Posted 11/08/13 08:38 AM Posted 11/08/13 08:38 AM Just a BA XR6 mate.
Kroozin Menace Legacy Donating Member 1,990 Member For: 15y 4m 25d Gender: Male Location: Sydney Posted 11/08/13 09:48 AM Posted 11/08/13 09:48 AM I kinda see it like putting lighter wheels on your car.. reducing rotating mass some what attached to the crank. Could it be that simple?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now