Jump to content

Recommended Posts

  • Legacy Donating Member
  • Member For: 23y 9m 16d
  • Location: Sydney
Posted

Thanks for the info Unigroup. Keep us posted on the results/issues etc......

  • Replies 409
  • Created
  • Last Reply

Top Posters In This Topic

  • Member
  • Member For: 24y
Posted

Ok, stage 1 will cost approx. $3900 but not finalised yet. The car on the dyno was a manual which is coping ok so far. Stage 2 kit will involve bigger injectors and a much bigger and improved intercooler.

From what I can gather from all companies and magazines, the weakest link is the manual box. I wish I could find out what Ford had up its sleeve for series 2. I rekon if they had a beefy 6 speed coming I would consider selling. I'm excited about this car though, the sky is the limit.

Street Tuner, you must let us know when you are pulling 500kw out of that ute! Now that, is a huge effort.

  • 2 weeks later...
  • Dyno Tuner
  • Legacy Donating Member
  • Member For: 23y 5m 5d
  • Location: Redcliffe
Posted

well I've just about put the finishing touches on our xr6t enhancement package, have done most of the dyno testing and will be travelling to the track next week to put her through the ringer, we ran the car in std form a couple of weeks ago and recorded 14.1 @ 100mph. I'm working on a couple of different levels of packages depends on peoples needs.

  • Member
  • Member For: 24y
Posted

Thanks dynosteve, that's a nice looking setup. What kind of power have you made on the dyno and what 1/4 mile are you aiming for? Also, if it's not too early, could you give us a price estimate?

Thanks,

Chris.

  • Dyno Tuner
  • Legacy Donating Member
  • Member For: 23y 5m 5d
  • Location: Redcliffe
Posted

I'll post some dyno sheets later today if I'm not too busy at work, however I'm doing all my dynoing in real time dyno mode not shootout mode(as this mode seems to give mchappy figures and I'd rather true ones) I'm also track testing each kit level so that I can give a person a true indication of benifits. I personally are aiming for an 11 sec 1/4 out of my own personal car. I'm accutally going to do a round trip on sunday-monday from brissy to sydney in it just to check economy and realiablity

  • Member
  • Member For: 24y
Posted

Dynosteve: Is the car manual or auto? Have you any information regarding the reliability of the T5?

To all those following this thread: The Capa site has been updated.

  • Dyno Tuner
  • Legacy Donating Member
  • Member For: 23y 5m 5d
  • Location: Redcliffe
Posted

mine is a auto and is working really good at the moment, unfortunatly I don't have much feedback on the manual other than what we hear here and on other forums.

  • Bored Member
  • Administrator
  • Member For: 23y 10m 27d
  • Gender: Male
  • Location: Dé·jà vu
Posted
and on other forums.

You can say fordforums here Steve were not as pendantic. :lol:

Did i hear a rumour that your LJ was written off?

Wasnt the show car was it?

  • Dyno Tuner
  • Legacy Donating Member
  • Member For: 23y 5m 5d
  • Location: Redcliffe
Posted

no my lj's not written off, I pulled it off the road 12 months ago after a couple of shows because of a couple of bubbles that appeared in the paint, I had the car stripped to find that the entire car that I had sandblasted so that the body could be done properly was bogged up and fibreglassed, wouldn't recommend that panel shop that did mine for anything, it comes out in july's edition of streetmachine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...