Jump to content

Recommended Posts

  • Banned
  • Member For: 13y 6m 27d
  • Gender: Male
  • Location: perth wa

no sh*t I was at blackwall today. im guessing you jamp of the cliff?

3rd gear drifts make bitches wet.

happy citizen day!!!

lol jks, straya *beep*!

  • Banned
  • Member For: 13y 6m 27d
  • Gender: Male
  • Location: perth wa

iv seen lots of people doing it but never got round to trying it, im always fishing or kayaking around there, nice place but to busy.

  • Member
  • Member For: 12y 6m 16d

so, car dented on 20/12/12... in for repair tuesday, got it back today.

not good enough. try again arsehats.

hair in the clear coat. grit in the clear coat. loose door trim. clear coat is noticably more 'rippled' than the oem stuff.

also, any one know if its correct, or lazy to 'blend' the paint on PERFECTLY UNDAMAGED PANELS (well, until they got to them anyway) rather than just painting my new door the correct colour to start with? no, I cant see the difference... but now they have stuffed a perfectly good panel.

slightly ticked off, to say the least.

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 17y 6m 16d
  • Gender: Male
  • Location: Probably above atmospheric pressure

Reminds me of the time I got mine repaired. Still have dust in clear coat and run marks on rear bar bottom edge...also can see the blending on passenger door in certain afternoon light.

Oh mine got damaged more while in to be repaired also. Backed into something in the workshop...

Edited by -SteveR-
  • Member
  • Member For: 12y 6m 16d

also.... went for a 'cruise' last night. (honestly, I was behaving for most of it)

nek minut
post-54173-0-06317200-1359800607_thumb.j

have replaced this one this morning, but there were no other 245s in stock. (the other side is not nearly as bad ie, borderline legal, due to spare being used at one time)

fronts are going on the back for now, as the centre has plenty of tread, its just the outside worn from cornering, so will have new 245/40-18s on the front.

he had 265/35-18s there.... mighty tempted to through those on the rear when the $s come in :)

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 17y 6m 16d
  • Gender: Male
  • Location: Probably above atmospheric pressure

I have had tyres do that too, it's like they become faulty after a while...

Note to all - we're looking at a February cruise being run on Thursday the 28th @ 7pm, idea is a simple catch up in Scarboro for food/talking sh!t followed by a lazy night cruise up the coast for those who are keen after eats.

Details from turbotrana over in the cruise ideas thread here:

http://www.fordxr6turbo.com/forum/topic/46047-the-wa-cruise-ideas-thread/page-14#entry1357826

I'm running a weekend cruise also, come vote on the day/time in the thread:

http://www.fordxr6turbo.com/forum/topic/83858-w-a-feb-2013-cruise/

  • Member
  • Member For: 13y 6m 13d
  • Gender: Male
  • Location: Perth, WA

Just bought a GT :D

But not the fpv kind, the core 12m kite kind and she's got some grunt!!

Anyone else kitesurf?

Yeah I kite mate! Sponsored by Airush ;) haha wheres your local?
  • Member
  • Member For: 13y 6m 13d
  • Gender: Male
  • Location: Perth, WA

I have had tyres do that too, it's like they become faulty after a while...

Note to all - we're looking at a February cruise being run on Thursday the 28th @ 7pm, idea is a simple catch up in Scarboro for food/talking sh!t followed by a lazy night cruise up the coast for those who are keen after eats.

Details from turbotrana over in the cruise ideas thread here:

http://www.fordxr6turbo.com/forum/topic/46047-the-wa-cruise-ideas-thread/page-14#entry1357826

I'm running a weekend cruise also, come vote on the day/time in the thread:

http://www.fordxr6turbo.com/forum/topic/83858-w-a-feb-2013-cruise/

Definately in for the scarboro cruise and a meal!!
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'