Jump to content

Recommended Posts

  • Member
  • Member For: 19y 8m 27d
  • Gender: Male
  • Location: PERTH WA
Posted

That's pretty impressive mate, Well done again.

So what's your next plan with the car? Strip it out etc or just keep on practicing with how it is?

  • Donkey Dick
  • Member
  • Member For: 16y 6m 2d
  • Gender: Male
Posted

$0 prize money. Peter Pike is a farking tight arse & didn't put up prize money for any class :crybaby:

Keeping car as is Brendan. Built it to run Super Street & OZ EFI Brackets for the season, which it has now won an event in each. Not a bad start to the season considering there's been 2 OZ EFI meets & only 1 Super Street meet!

  • Donkey Dick
  • Member
  • Member For: 16y 6m 2d
  • Gender: Male
Posted

Guys (looking at you mainly Luke), I'm after the 2 x bolts that hold the clutch master cylinder to the pedal box in a BA. Turns out I have the wrong bolts, which is allowing the MS to move slightly & not operate 100%. All the faffing around I have been doing, ie. replacing MS, Slave cylinders, fluids, etc etc has all been a waste :crybaby:

FoMoCo don't stock/make them, Cov's can't get them, wreckers wont sell seperately or lend me one to match at a fasteners joint... So, I require one for a day max to be able to walk into Cov's with, ask for one the same/similar, walk out & return. HELP!!!

  • Manual mode ________________________ All day, erryday
  • Legacy Donating Member
  • Member For: 18y 9m 27d
  • Gender: Male
  • Location: Probably above atmospheric pressure
Posted

Oh well who cares if it's $0 when you get the satisfaction of winning. At least a set of plates or trophy I hope!

  • Moar Powar Babeh
  • Legacy Donating Member
  • Member For: 20y 11m 29d
  • Gender: Male
  • Location: Perth
Posted

Guys (looking at you mainly Luke), I'm after the 2 x bolts that hold the clutch master cylinder to the pedal box in a BA. Turns out I have the wrong bolts, which is allowing the MS to move slightly & not operate 100%. All the faffing around I have been doing, ie. replacing MS, Slave cylinders, fluids, etc etc has all been a waste :crybaby:

FoMoCo don't stock/make them, Cov's can't get them, wreckers wont sell seperately or lend me one to match at a fasteners joint... So, I require one for a day max to be able to walk into Cov's with, ask for one the same/similar, walk out & return. HELP!!!

Ring MWA, Mal supplied me with two when I converted the Ute. They have a pharked external torx head on them and are a boitch too get out.. Im 99% sure they are a 6mm bolt but I couldnt tell you the length.

  • Donkey Dick
  • Member
  • Member For: 16y 6m 2d
  • Gender: Male
Posted

Scratch that, Cov's rang me back & said they found some. Thanks f*ck!

  • Totally not a Cop
  • Legacy Donating Member
  • Member For: 15y 7m 27d
  • Gender: Male
  • Location: Melbourne
Posted

Watched The Lion King for the first time last night. Good movie, can't believe I didn't see it when I was a kid. I remember seeing bits of it, but not the whole thing.

  • Manual mode ________________________ All day, erryday
  • Legacy Donating Member
  • Member For: 18y 9m 27d
  • Gender: Male
  • Location: Probably above atmospheric pressure
Posted

lol! due to pics in funny thread on AL?

381701_10150393475802881_645917880_8484969_791096133_n.jpg

  • Totally not a Cop
  • Legacy Donating Member
  • Member For: 15y 7m 27d
  • Gender: Male
  • Location: Melbourne
Posted

Nah, due to the source of most of the funny pics. Imgur, haha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...